Activity Stream

His carbon/carbon setup really does well...

We're only a minute/lap behind F1!

Yea. Because your car stops and corners like an F1 car. Have you been to tech lately?

Nice, both AI and CMC starting to grow. I've been watching some F1 videos so I can get my braking points figured out!!

I'm signed up now

Al is on the list so including Jander we're up to 9 in CMC!

Global Rally Cross did (The redbull one) I think World RallyX is still OK (FIA)

Didn't rallycross just implode?

Same here. I have a heap of them that I got From him. You're welcome to a few of mine if you're dynoing up in DFW or if you know about the size I...

You gotta keep a mityvac strapped to the dash then

My C5 Z06 developed the issue on its own. I replaced slave and master with new GM parts and remote bleeder, no change. Replaced clutch and shimmed...

You can also follow my whole saga on this here: http://www.aicmctexas.com/showthread.php?5640-Clutch-won-t-disengage&highlight=clutch I also had...

The Tick/Tilton MC is a brute force solution to fixing clutch disengagement issues the right way... They are; LS/t56 stock clutch lines do...

If you double clutch and find that it shifts easier, that points to synchros. If it's the same or worse then maybe clutch/hydraulic issue. I...

At the risk of saying something incorrect or stupid ... Here goes anyway. My 94 Vette had what was effectively a restrictor in the stock hydraulic...

Do you still have a stock master cylinder? Tick makes an aftermarket piece with a Tilton cylinder. Lots of LS based Camaros and Corvettes had...

The more I think about how it was acting, I think Fbody is right. Might be the clutch not engaging fast enough. We had to replace the clutch at TWS...

FWIW I got mine from Boudy, but make sure you get the bigger ones as he still had some CMC1 plates kicking around.

I know I got one set from you and I got another set from Mitch after he quit racing. I am not sure which set went with the car when I sold it.

I made them for you. JJ

I’m partners with the AJ Foyt Racing gearbox tech in Motorsport Driveline Tech. We be glad to take this on and are in the Houston area. Call my cell...

I think I still have a set I got from Jerry or Mitch. Not sure what sizes are there though.

I think I'll add that to my RCR list this year. Make it more clear that exhaust restrictors are allowed as they seem to fall within the intent of the...

It's in there... As I understand the intent of HP/TQ rule, one would declare (as I do) that there is an exhaust restrictor. Certainly I can...

6.21.4 All Cars may install a restrictor between the air filter and intake manifold to reduce horsepower and torque. The diameter and thickness of...

Not sure of a Houston "shop" which is why we started doing our own. Joe Dederich is in Dallas. If we knew each other better we might give it a go...

Which MUST be signed day of or you're screwed. We'll see how lenient they are with this change, but I'll be pissed if the forms I got signed on...

I heard they did a bunch of track grinding a couple of weeks ago, and they they're adding stuff for World Rallycross to run there soon. A lot of...

Several of the guys have gone to exhaust restrictors. On the cars that I wrench on, I hated how much oil got trapped up around the throttlebody...