PDA

View Full Version : Cleaning the garage



Wirtz
02-03-2008, 06:02 PM
**edit to update the list**

Email me at powerslide91 at yahoo dot com and I can send you pictures.
Jeff

3rd gen Camaro
• GM NOS engine bolt set, below is the quantity and GM PN.
o (16) 12560744
o (10) 12558840
o (4) 12560745
• Alternator pulley, steel, 3” diameter, made by March [new]
• Camaro front grill (GM PN #14081371) [new]
• Camaro RS hood, straight. Smooth factory hood, no vents or buldges, aero-dynamically the cleanest of the factory hoods ;)
• Dual factory electric fans, ’92 Camaro
• Edelbrok TBI front strut 3 point brace
• Moog “problem solver” outer tie rods with new hardware [new]
• Canton oil cooler sandwich plate for -10AN [new]
• (2x) GM NOS rocker panel “Z28” badges in silver [new]
• Spohn HD tie rods couplers [new]
• 1LE brake proportion valve (not sure if being 1LE makes it special to be honest….)
• Hide-a-hitch, bolts to rear bumper support, includes stem + 2” ball
o 2000# capacity with 200# tongue weight
o Includes a light controller
o Needs a standard locking pin
o part number BB-v5-2-1234
• 1LE rear lower control arms
• Global West rear lower control arms, heim joints both ends [new]
• Global West adjustable length panhard bar with poly + heim [new]
• 1LE panhard bar
• Set of 1LE spring, stock ’92 Camaro
• ’92 LB9 lower intake manifold (10088016)
o Chip on one water port, was not leaking on car it came off of

Other stuff
• Summit aluminum 3” radiator, chevy in/out (PN 9607) [new]
• Perma Cool electric fan, 18” [new]
• (2) ATL fuel cell -10AN duck feet w/ sock [new]
• Longacre toe-bar
• Mallory fuel pressure regulator, in + 2 outs (4207) [new]
• 9q Castrol Mercon V ATF

Truck
• EGR blockoff plate and finger stick for LBZ Duramax [new]

ShadowBolt
02-03-2008, 06:13 PM
(4) 12oz cans R12



I still have two cases I bought at Sams about a year before they took it off the market. I have been told you could get $100.00 per can on ebay?


JJ

Nick
02-03-2008, 07:02 PM
PM sent

David Love AI27
02-03-2008, 09:36 PM
How about entire rear end w/brakes? Also, what do you want for the GTAs?

Wirtz
02-04-2008, 11:09 AM
Ok, I think I answered the emails and sent back some PMs.

Thanks all,
Jeff

Wirtz
12-01-2008, 01:22 PM
I updated the list and thought I would repost this for any of the guys building 3rd gens. I thought if you see something you want, let me know and we can try to work something out to bring it to the banquet.

Thanks,
Jeff

mitchntx
12-01-2008, 01:48 PM
• Canton oil cooler sandwich plate for -10AN [new]

• Global West rear lower control arms, heim joints both ends [new]


Is the adapter a 540 or a 541?

GW arms are steel or aluminum?

Wirtz
12-01-2008, 06:44 PM
Mitch,

The Global West rear LCAs and the Panhard are both steel parts. The LCAs are actually pretty nice, large diameter tubing.

The Canton adaptor is PN 22-546.

Jeff