PDA

View Full Version : CMC17 is alive again



ShadowBolt
01-11-2009, 09:04 PM
It fired right up but had a knock on the right bank. I could feel it. I took off the valve cover and started it back up (these Fords sure don't oil the top end like a small block Chevy) without the cover and no knock. I set the cover on and pulled the coil wire and turned it over with the starter. Valve cover goes up and down. I call Michael and the first thing he ask is if it's on the passenger side. Yes it is so it's the baffle for the oil fill tube. Sure was a scare. Can't wait to s what the dyno thinks about this hot rod.


JJ

evarner
01-11-2009, 09:50 PM
Awesome and gratz Jerry!!!! Make sure to take plenty of video and pics!! 8)

Chuck
01-11-2009, 10:43 PM
Glad to hear the beast is running Jerry!!!

Chuck
CMC #14