PDA

View Full Version : Getting Sprung



Hood
02-23-2009, 12:49 PM
Where would be the best place to find springs for the 3rd gen F-body? Is the best setup a constant rate spring with an adjustable perch or a variable rate/stock spring cut to ride height? I'd like to run an 850# front with a 190# or 175# rear. Getting the ride height correct is the limiting factor in choosing this combination. I was contemplating a circle track source for the components but would like to hear suggestions.

Thanks,

AI#97
02-23-2009, 10:20 PM
See! you hinted that you might be fast and talked a little Sh!T and guess what? No help! LOL!!!! :oops: j/k someone will probably chime in soon but be careful! :wink:

mitchntx
02-23-2009, 10:34 PM
See! you hinted that you might be fast and talked a little Sh!T and guess what? No help! LOL!!!! :oops: j/k someone will probably chime in soon but be careful! :wink:

Get's the board, moves to the inside, breaks free, superman from the top of the key .... and slams it home!

Wirtz
02-23-2009, 10:41 PM
Just yoik the springs and run on the bumpstops all round.

mitchntx
02-23-2009, 10:44 PM
Gary, welcome.

You are now one of us.

:lol:

Hood
02-24-2009, 12:54 AM
So my ploy is working then? :wink:

Cough... I really don't know what the heck I'm doing... cough...