Enkei wheels

[MikeP99Z]

Guys:

I know the Mustang guys are looking for RPF1s 17x9.5 18mm offset 5x114.3 for AI. PM me if you need these, I can likely get them at a better price through my sponsor than you can find on the internet.

I'm working on finding an 18# wheel for CMC2, but I'm not sure I can get the same offset.

Unfortunately, Enkei no longer makes an F-body bolt pattern in 17s...

Also, I can get good deals on other items such as ARP etc.

Let me know.

MP

[jeremiahkellam]

Guys:

I'm working on finding an 18# wheel for CMC2, but I'm not sure I can get the same offset.


MP

That's easy, you either run a 8" 99 gt wheel or you call Forgeline, Jongbloed or Kodiak. Otherwise, the best you are going to find for less than $300 a wheel, is 20-21 lbs...

[cjlmlml]

F U patterson, I just picked some up today. Thanks < appreciate ya.

kiddin.

although I just bought some. What is the price for the wheels you mentioned?

[MikeP99Z]

Less than what you paid =)

Miss the AMG?

[cjlmlml]

not at all. Driving a 2008 Mustang Gt, It provides the exact same driving experience.













sound of weeping in background.......................

[AI#97]

Mike, I still need to sell my 8 konigs, well 7 since Gunter busted one, but I will be looking for a second set of the RFP1's sometime after the first of the year.

I got mine for $250ea....hook a brutha up and don't forget the hub centric rings!

[MikeP99Z]

$225 each.

no shipping (if its here for a local person).

I'll have to look into the hubcentric rings, need more info on those though.

[marshall_mosty]

I can have the hubcentric rings machined by the same machinist that is doing the hubs. Depending on what Mike finds out about the rings from his source, we can choose which direction to go.

The one's I will get are 6061-T6 and probably will cost around $50/set of 4.

[AI#97]

I can have the hubcentric rings machined by the same machinist that is doing the hubs. Depending on what Mike finds out about the rings from his source, we can choose which direction to go.

The one's I will get are 6061-T6 and probably will cost around $50/set of 4.

I'll have to find the source where I got mine that are aluminum. They were $39.00 a set of 4 plus shipping. You really only need one set unless you bond them in.

Mike, the ones I needed were like 70.5 mm to 73mm...IIRC.

at the $225 price, let me know when you put this together! I'll take 4 if funding is available.

for reference, My car with teh MM stuff, drop spindles and the above mentioned RFP1's with ZERO spacers gives 72.75" track width in front on RA1's....your results may vary. Beware at the rear as clearance will become an issue on SN95's and foxes unless you use the fox length rear axle. They pretty well fill my SN99 set and had to roll fenders for the first time.

[MikeP99Z]

The Enkei and ARP stuff is by no means a time sensitive deal - and good pricing can be worked out on any of their products. Feel free to tell your friends.

Hubcentric rings - I understand that they come in plastic or metal (not sure if there is a choice depending on the wheel). Plastic are like $5 each and metal are around $8 or $9 each. I'd have to find out on a case by case basis before I could solidify the price or the actual item.

[MikeP99Z]

Whoever wants Enkei wheels at a good price for whatever car, let me know. Just spec the model/size/etc.

The $225 price is for the above 17x9.5 RPF1s (18mm or 38mm offset).

Matt: the price is good through the end of the year. Don't have 2010 pricing yet.

[marshall_mosty]

Mike,
Not ready, quite yet. However, is it $225 plus tax and shipping, $225 plus shipping, or $225 shipped to my door?

Just trying to work out logistics for the future. Will probably be 2010 before I can pickup a new set of wheels.

[MikeP99Z]

$225 plus tax. Since you are local there is no shipping.

[marshall_mosty]

Thanks Mike. I'll let you know when I'm ready.

[AI#97]

back from the dead.... Looking for two of the 17x9.5 Mustang wheels with offsets and lug pattern mentioned in post #1.

Can I call Alamo and just say "Mike P said you will sell me cheap wheels...."?

need two before TWS.

gracias.

[MikeP99Z]

Warehouse stock being verified in the morning.

Two 17x9.5 RPF1s, 18mm offset, 5x114.3.

Still $225 each for y'all.

Note: these are picked up at the warehouse, and I'll grab them from the shop for local delivery in DFW or at a track event. No one has to pay shipping then - unless you want them shipped somewhere.

[AI#97]

Warehouse stock being verified in the morning.

Two 17x9.5 RPF1s, 18mm offset, 5x114.3.

Still $225 each for y'all.

Note: these are picked up at the warehouse, and I'll grab them from the shop for local delivery in DFW or at a track event. No one has to pay shipping then - unless you want them shipped somewhere.

I'll be out and about this week in mid cities...can pick up mine if need be. PM details for payment if you find them.

In silver BTW....

[MikeP99Z]

I'll ring ya tomorrow.

As above in this thread - tax has to be added unless its business to business with a tax ID number etc. (I'll have to verify this whole business tax thing - not my area of expertise).