Good Start for Hallett

[nasa-rm]

Thunder Race Group

9 CMC2 Mitch Warren Granbury TX Pontiac Firebird 1996 Natwell Welding Supply\ Moonlight Printi
14 CMC2 Charles Penney Round Rock TX Ford Mustang 1990 Motion Dynamics
23 American Iron David Neary The Woodlands TX Ford Mustang Cobra 1994
32 CMC2 Gary Robertson Richmond TX Chevrolet Camaro Z28 1986 Witchdoctor Motorsports
35 CMC Chris McComb Riverside CA Ford Mustang 1994 Kolorwork; Hanksville Hot Rods
39 CMC David Francis Pearland TX Chevrolet Camaro 1994 Orange Is Fast!
43 CMC2 Raybob Coleman Littleton CO Chevrolet Camaro Z28 1998 the mighty Dudes Framing Corp
55 CMC2 Tommy Schlender Parker CO Pontiac Firebird 1995 Applegate Garage Carstar Collision Discount Appliance Warehouse
57 CMC Brad Densmore Colorado Springs CO Chevrolet Camaro 1991 Steve Mills Racing & Empirical Environmental
67 American Iron Marshall Mosty Denton TX Ford Mustang 1989 Bell Racing\ John Mosty Company
77 CMC2 Randy English Spring TX Chevrolet Camaro 2000
79 CMC Nicholas Runyon Fort Worth TX Chevrolet Camaro 1984
85 CMC2 Wayne Stehle Houston TX Chevrolet Camaro 1998
95 CMC2 Morgan Dawdy Austin TX Pontiac Firebird 1995

[BlueFirePony]

Hmmm...I could swear I registered in January...I scheduled work, my sons birthday, my parents 50th anniversary in Canada and a couple less important activities around that weekend...I'll take care of it when I get back to the home office.
Hallett 2011 - BE THERE!

[Fbody383]

Thunder Race Group

39 CMC David Francis Pearland TX Chevrolet Camaro 1994 Orange Is Fast!

As long there are at least 5 CMC cars I'll stay... less than that and it's The Duece; I wanted to register semi-early so all the true CMC cars could get a car count.

[AllZWay]

As long as I get my car back together by then... I am definitely in.

[nasa-rm]

Hmmm...I could swear I registered in January...I scheduled work, my sons birthday, my parents 50th anniversary in Canada and a couple less important activities around that weekend...I'll take care of it when I get back to the home office.
Hallett 2011 - BE THERE!

Nope.... not for Hallett. Yet.

[GlennCMC70]

I'll not have my car there. I also may not be there at all.
I guess we need to chat w/ the RM guys and see who all is still in CMC1. I know alot of the RM CMC'er modded up for CMC2 as they are all moving at once (2012). Even though they have CMC2mods done, they are suposed to be restricted to CMC1 power. I think I was clear that in this region, that would place them in CMC2 for Hallett. Hallett has to be the track in the Texas Region where HP means the least.

[chris-CMC#35]

I'll not have my car there. I also may not be there at all.
I guess we need to chat w/ the RM guys and see who all is still in CMC1. I know alot of the RM CMC'er modded up for CMC2 as they are all moving at once (2012). Even though they have CMC2mods done, they are suposed to be restricted to CMC1 power. I think I was clear that in this region, that would place them in CMC2 for Hallett. Hallett has to be the track in the Texas Region where HP means the least.

Glenn,

We have a clear understanding in RM that if a car has CMC2 parts on/in it, it will run CMC2 when it goes out of the RM region; this specifically includes Hallett.

So all should be good.

thx
chris

[GlennCMC70]

Thanks for the clarification. This wil help some of our folks decide on CMC or CMC2 for Hallett. I hope we are all in CMC2.

[nasa-rm]

As of 5/18

Thunder Race Group

7 CMC David Sealander Peyton CO Chevy Camaro 1983 Steve Mills Racing; Empirical Environmental
8 CMC Team Incidental Contact Goodland KS Ford Mustang 1986 Hanksville Hot Rods
9 CMC2 Mitch Warren Granbury TX Pontiac Firebird 1996 Natwell Welding Supply\ Moonlight Printi
11 CMC2 Michael Mosty Richardson TX Ford Mustang Coupe 1989 Bell Racing
14 CMC2 Charles Penney Round Rock TX Ford Mustang 1990 Motion Dynamics
22 CMC2 Cody Powell Castle Rock CO Chevy Camaro 2000 None
23 American Iron David Neary The Woodlands TX Ford Mustang Cobra 1994
31 CMC2 Nicholas Valentin San Antonio TX Chevrolet Camaro Z28 1992 Witchdoctor Motorsports
32 CMC2 Gary Robertson Richmond TX Chevrolet Camaro Z28 1986 Witchdoctor Motorsports
34 CMC2 Wade Zimmer Bryan TX Ford Mustang 1986 TAMSCC
35 CMC Chris McComb Riverside CA Ford Mustang 1994 Kolorwork; Hanksville Hot Rods
39 CMC David Francis Pearland TX Chevrolet Camaro 1994 Orange Is Fast!
43 CMC2 Raybob Coleman Littleton CO Chevrolet Camaro Z28 1998 the mighty Dudes Framing Corp
48 CMC2 Steve Mulder spring branch TX Chevy Camaro 1995
54 CMC2 Sam Crumpacker College Station TX Ford Mustang Cobra 1994 ...accepting applications
55 CMC2 Team Jordan Georgetown TX Ford Mustang 2002
55x CMC2 Tommy Schlender Parker CO Pontiac Firebird 1995 Applegate Garage Carstar Collision Discount Appliance Warehouse
57 CMC Brad Densmore Colorado Springs CO Chevrolet Camaro 1991 Steve Mills Racing & Empirical Environmental
67 American Iron Marshall Mosty Denton TX Ford Mustang 1989 Bell Racing\ John Mosty Company
77 CMC2 Randy English Spring TX Chevrolet Camaro 2000
79 CMC Nicholas Runyon Fort Worth TX Chevrolet Camaro 1984
82 CMC2 Daniel Allford Houston TX Chevrolet Camero 1993 ARC Specialties
85 CMC2 Wayne Stehle Houston TX Chevrolet Camaro 1998
95 CMC2 Morgan Dawdy Austin TX Pontiac Firebird 1995
404 American Iron Team Bluefire Racing McKinney TX Ford Mustang GT 2005 My Wife; DFWCharityRacing.com; 281Motorsports.com; Nowzad

[Al Fernandez]

25 and counting...still eight short of last year :/

[nasa-rm]

Yeah... what's with Balingit and Fernandez defecting to other classes?!?!?! And everyone in the Mid West starting families?


No worries, there are more waiting for room on their CC's to sign up. BTW, if anyone is in this boat - please let me know and we will at least save a spot for you.

[Fbody383]

Yeah... what's with Balingit and Fernandez defecting to other classes?!?!?!

And "The Todd."

I guess Landrum, Liebbe, Wirtz, and Kellum decided to give some of the MPS a chance this year.

All you English!

[edrock96GT]

I will be. Things are a little tight right now but I'll likely register after my next payday.

[AllZWay]

I waiting until my car is back together completely before I comitt. It is looking good since I fired ole 28 last night.

[Casey_SS]

I'll be registering soon too....need to pay for the rearend and get tires ordered first. I'll be there though...

[Crumpacker]

It is looking good since I fired ole 28 last night.

Yeeaayyaaaa!

[michaelmosty]

I waiting until my car is back together completely before I comitt. It is looking good since I fired ole 28 last night.
Awesome news James, we missed running with ya at TWS.
We need ammunition to take down the evil CO guys. :^)

[AllZWay]

Awesome news James, we missed running with ya at TWS.
We need ammunition to take down the evil CO guys. :^)

No kidding....We can't let those guys take the summer national crown.

It had a slight miss last night , but i ran out of time to check things. At six flags today with the kiddos, so maybe before the weekend is up I will get the bugs ironed out.

[marshall_mosty]

American Iron
Registered
David Neary
Marshall Mosty
Brian Calder

Pending
Eddie Rock
Casey Holdway

Where are you guys??
Frank Robertson
David Donovan
Chris Lyons
Jay Carley
Any of the RM AI guys.. I'm sure there is a few guys left, right???

[cobra132]

OK, OK, Jeeezzzz. Marshall General Mosty

[Cody Powell]

As far as I know, RM AI will not be represented. We is dead but 2 and they ain't comin.
On a more cheery note, some please tell me the mighty Corey Rueth and the amazing Lisa will be there?

[marshall_mosty]

Does anyone have an enclosed trailer or motorhome spot available for Gavin and me? Need to find a place to crash. The Tahoe doesn't sleep near as good as the old Explorer.

[mitchntx]

Does anyone have an enclosed trailer or motorhome spot available for Gavin and me? Need to find a place to crash. The Tahoe doesn't sleep near as good as the old Explorer.

I'll have my trailer there, but not staying there.

There are other tentative tennants ... James and Glenn. But both of them are waffling on making the trip.

Pay for the power hook-up and the AC works great!

If you have an air mattress, bring some sort of pad to lay it on. The diamond plate floor will gouge holes in it.

[AllZWay]

I'll have my trailer there, but not staying there.

There are other tentative tennants ... James and Glenn. But both of them are waffling on making the trip.

Pay for the power hook-up and the AC works great!

If you have an air mattress, bring some sort of pad to lay it on. The diamond plate floor will gouge holes in it.

I am still hopeful at this point. Dad and I are going to start putting heads back on the car tonight.

[GlennCMC70]

Did you find the problem?

[marshall_mosty]

I am still hopeful at this point. Dad and I are going to start putting heads back on the car tonight.James, if you make it, can we both bunk in Mitch's trailer? I have a queen size mattress.

I'll pay the power hook-up.

[AllZWay]

Did you find the problem?

We put the engine back together last night and it runs and sound good... so it was definitely something with the other set of heads, but unfortunately nothing stands out as obvious. It must have a slightly burned valve, just not bad enough to be visible. I'll have those heads rebuilt later and possibly find out.

But the good news is that it looks darn good that I will make it to Hallett now. I just need to finish putting the car back together. Last night we just put enough together to hear it run.

I will need to get a new dyno.... and maybe Alamo can get me in on Saturday.

BTW... I might need to borrow a restrictor plate. I have never had to worry about making over 260, but this engine possibly could do that.


Marshall...I am sure we can manage it.

[GlennCMC70]

If you need a plate, let me know and I'll see about getting my set to you.

[AllZWay]

If you need a plate, let me know and I'll see about getting my set to you.

I would like to borrow them and then purchase a set if I need them.

Thanks.....

[GlennCMC70]

Let me know where/when your dyno is. I'll meet you there or drop them off there before you get there.

[ShadowBolt]

We put the engine back together last night and it runs and sound good... so it was definitely something with the other set of heads, but unfortunately nothing stands out as obvious. It must have a slightly burned valve, just not bad enough to be visible. I'll have those heads rebuilt later and possibly find out.


Could be a bent or sticking valve. Some aircraft engines have issues with sticking valves.

JJ

[AllZWay]

Let me know where/when your dyno is. I'll meet you there or drop them off there before you get there.

Thanks a ton Glenn... Looks like Alamo at 10:00 am on Saturday.

[GlennCMC70]

Thanks a ton Glenn... Looks like Alamo at 10:00 am on Saturday.

I'll likely drop them off tomorrow. If not, I'll meet you there Sat.

[AllZWay]

I'll likely drop them off tomorrow. If not, I'll meet you there Sat.

Glenn is 'da man'... Thanks... I really appreciate it.

I may not need them, but I wouldn't have time to get some and re-dyno if this engine makes more than 260.

[David Love AI27]

Nice field of cars/drivers... you guys will have a blast...

[AllZWay]

I am in .... I am in.... I think I am about ready to declare it completed.

The dayum master disconnect freaking broke again... so I have one on order and think that is about it to call it complete.

[Casey_SS]

Awesome! Glad to hear it James :)

[Rob Liebbe]

I am in .... I am in.... I think I am about ready to declare it completed.

The dayum master disconnect freaking broke again... so I have one on order and think that is about it to call it complete.

Before or after the dyno? Those cars do weird things when the power goes south.:rolleyes:

[Clyde]

Could be a bent or sticking valve. Some aircraft engines have issues with sticking valves.

JJ

Listen to Jay's mechanic he knows his stuff.

[ShadowBolt]

Listen to Jay's mechanic he knows his stuff.


Funny "Clyde".

JJ

[way2neary]

Hey Gents

I am unfortunately going to cancel. Its a long story but work priorities require my attention. See you at TWS and good luck racing!

Dave

[marshall_mosty]

Hey Gents

I am unfortunately going to cancel. Its a long story but work priorities require my attention. See you at TWS and good luck racing!

DaveDave... Sorry to see that you won't be there.