260/303
Printable View
260/303
245/285 through a 54 mm restrictor with gas from April 2016
<a href="https://imgur.com/rPYTJRT"><img src="https://i.imgur.com/rPYTJRTl.jpg" title="source: imgur.com" /></a>
Chris will send the dynojet run files to me soon. I will put up a graph comparing the different types of motors. Should be interesting!
I made 261/304 on a 57mm BTW
264/297, my freakish 308wtq has disappeared with my soccermom-mobile bottom end. :(
Good solid numbers (except Tilton's)... :)
Any luck with the dynojet files? I can load em up in Winpep if someone wants to send them over.
Not yet, I'll ping him again
Tilton-what am I missing with the 54 mm restrictor? Is that the factory MAF or something?
My first trip to the dyno after a motor rebuild and adding heads/cam/intake to make CMC power, the ambient temp was just above freezing and the diff/transmission weren't even warmed up by the time the car was strapped down. It put down a low 260hp number on the first pull and climbed each time as everything warmed up. On the third run it reached 267.7 so I threw on the biggest restrictor Wade brought with him. With a 54mm restrictor the car made 256/295 back to back to back. The stock Fox throttle body is 58mm so 54mm isn't too bad.
Though I'm not planning on racing this year (back in 2019) I wanted to help boost the attendance and see how healthy the motor was with the same components. I could have pulled the restrictor and played with the timing but 1.5 year old gas was holding it back.