Originally Posted by
GlennCMC70
If you set the Fox track to inside the OEM bodywork, you in no way could get the 4th gen's track narrow enough to balance things out. This was the problem w/ setting a "limit" for track. The Fox got a huge bump. The GM's got nothing beyond what had been allowed since day 1 of CMC and folks think the GM's were given something. We moved to a hard number since it was hard to tell if a guy stretched his fenders or had a tweaked body from a crash. The Fox also need this to fit the max wheel size. No way the series is going to require a 17x7 wheel cause that is all the Fox can fit w/ OEM fenders. OEM 17" wheel size for the GM's is 9". Makes no sense to make the wheel width smaller than that. Common aftermarket 17's are 9.5" for Ford and GM. Sounds like a good number. Fox needed help in 2 areas - increase in track and fitting 17x9.5's. We allowed mods - not required them. At this point I still think 16x8's are faster than 17x9's. I picked up 20lbs from the "upgrade". Strongly considering going back to 16's for 2013. So far w/ 17's and 30 more HP, I'm slower.
I don't think the Fox or SN-95 need any help. Kellam ran plenty fast in the SN-95. I can assure you he can only drive the car up to what it is capable of, and not beyond. The potential of the car was demonstrated. We don't allow mod's based on driver skill. Mosty in TX has kicked all our asses. Fox. Kellam has kicked all our asses. SN-95. Wirtz has kick all our asses. 3rd gen. Alford/Proctor is kicking all our asses. 4th gen. Varner has kicked all our asses. Fox. We have a pretty good balance. I see the TA on the Fox/SN-95 likely upsetting that. If it is allowed it will be for chassis longevity. If it provides a increase in performance, the platform will be penalized. Could be increased weight. Could be less track. Who knows. Could be both.
Ford guys want a TA. Why? Cause GM guys have one. So do we require the Fords w/ TA to set the pinion angle to match that of the GM (stock by the way). How about requiring it to be made of thin stamped sheet metal that induces wheel hop of the likes that you have never seen? Think the T-5 is weak now? Wheel hop that TA Fox/SN-95 w/ a 4th to 3rd downshift at 90-100 mph. Ever grenaded a ring gear and pinion from it? Since the Ford aftermarket like optimized the pinion angle and optimized the material it is made from as well and designing it to be very rigid, we will now have to allow the GM's to use aftermarket TA's as well. Cause we all gotta have the same crap, right?
Your gonna be had pressed to find a CMC Director who thinks the Fox/SN-95 needs an adjustment at this point. If there is one, they need to speak up in the Director emails, cause I haven't see any evidence of it.
Rant off.