Torsen T2R

Torsen T2R for 8.8 comes with 3:73 ring and pinion
Lightly used by one lady owner.....then me
$500obo

Can install to your car at reasonable price
Call or txt 832-8six3-2314

Or as an option, above complete with 8.8” housing and 9” semi floating axles cambered to 0.6*

Ugh, was so hoping this was for a 4th gen when I clicked.

Quote:

---

Originally Posted by Trublu

Or as an option, above complete with 8.8” housing and 9” semi floating axles cambered to 0.6*

---

CMC legal?

JJ

Quote:

---

Originally Posted by ShadowBolt

CMC legal?

---

The differential, yes. The axle housing assembly, no.


Richard P.

Quote:

---

Originally Posted by RichardP

The differential, yes. The axle housing assembly, no.


Richard P.

---

Both are cmc legal unles the rules changed recently

Quote:

---

Originally Posted by Trublu

Or as an option, above complete with 8.8” housing and 9” semi floating axles cambered to 0.6*

---

What year housing?

- Josh

Quote:

---

Originally Posted by Trublu

Both are cmc legal unles the rules changed recently

---

I assumed it was legal and out of Yella Terra. I thought .5 degrees was max camber in the rear housing. I can't find anything in the rules.

JJ

Quote:

---

Originally Posted by Trublu

Or as an option, above complete with 8.8” housing and 9” semi floating axles cambered to 0.6*

---

Price for the complete housing?


JJ

Quote:

---

Originally Posted by ShadowBolt

I assumed it was legal and out of Yella Terra. I thought .5 degrees was max camber in the rear housing. I can't find anything in the rules.

JJ

---

0.6* is allowed, I think semi floaters are allowed according to section 6.29.3. Full floaters are illegal.

- Josh

Quote:

---

Originally Posted by Sook

0.6* is allowed, I think semi floaters are allowed according to section 6.29.3. Full floaters are illegal.

- Josh

---

Sook, what section is the .6 degree talked about? I can't find it.

JJ

Quote:

---

Originally Posted by ShadowBolt

Sook, what section is the .6 degree talked about? I can't find it.

JJ

---

6.33.10 Maximum rear camber on all cars is 0.6 degrees negative.


Richard P.

Quote:

---

Originally Posted by Trublu

Both are cmc legal unles the rules changed recently

---

My interpretation is that the modified housing is not legal but I can see how an alternate interpretation is possible. I don't think the rules are clear on this...


Richard P.

Quote:

---

Originally Posted by RichardP

My interpretation is that the modified housing is not legal but I can see how an alternate interpretation is possible. I don't think the rules are clear on this...


Richard P.

---

How is the housing modified? I think the carbon fiber differential cover should be illegal.

Quote:

---

Originally Posted by BryanL

How is the housing modified?

---

The ends of the axle tubes are cut off and 9" style axle tube ends are welded on at a slight angle.


Richard P.

I found its much easier to get rear camber by bending the axles themselves.

You only get peak negative camber 50% of the time during the wheel rotation cycle though.

Quote:

---

Originally Posted by Pranav

I found its much easier to get rear camber by bending the axles themselves.

You only get peak negative camber 50% of the time during the wheel rotation cycle though.

---

Say whaaaaaaat

Quote:

---

Originally Posted by mach1

Say whaaaaaaat

---

https://giphy.com/gifs/car-cQvYmsFoYrAyc

Quote:

---

Originally Posted by Pranav

https://giphy.com/gifs/car-cQvYmsFoYrAyc

---

Haha exactly

Quote:

---

Originally Posted by ShadowBolt

Price for the complete housing?


JJ

---

Shoot me a txt Jerry

Quote:

---

Originally Posted by Pranav

I found its much easier to get rear camber by bending the axles themselves.

You only get peak negative camber 50% of the time during the wheel rotation cycle though.

---

Richard is making too many assumptions. The ends are true to the tubes and the tubes are bent for camber