From the Hot Pit Suites
Race #3 (Rain Race Start / Dan and Michael's shenanigans)
https://www.dropbox.com/sh/4p3ctiye9...ain%20race.MOV
Race #4
https://www.dropbox.com/sh/4p3ctiye9...nvert.MOV?dl=0
Printable View
From the Hot Pit Suites
Race #3 (Rain Race Start / Dan and Michael's shenanigans)
https://www.dropbox.com/sh/4p3ctiye9...ain%20race.MOV
Race #4
https://www.dropbox.com/sh/4p3ctiye9...nvert.MOV?dl=0
Yo, JJ, where da vid's man?
I'm at my wits end on the racecar's oil leak. Put UV dye in and ran it 10 minutes as the instructions said.
The underside is now completely orange. The inside of the bell housing is dripping wet, but so is the outside. Everything is coated in oil.
I guess I'll start with replacing the valley cover gasket (newest part on the motor). If that doesn't solve it, I'll go for the rear main seal.
I had a similar issue with the factory installed oil temp plug in my oil pan(canton, ford), it was hard to find but I finally got it. How many sets of eyes have you had on it after cleaning it vigorously and then firing it up? I may be able to swing by if you need another set of eyes.
Oil pressure sender on the top of the block behind the intake? They snap off pretty easy.
Only my two eyes. I welcome more. It'll be out of the trailer until late afternoon, then it gets re-banished. Out of sight, out of mind.
I checked the upper oil sender. If feels less wet than everything else. It is also working.
Congrats to Mike Patterson for breaking the AI track record.
https://www.dropbox.com/sh/4p3ctiye9...052.542%20.MOV