Pump the brakes (see what I did there?). I thought stock rotors weren't compatible with Stoptech calipers on a 4th gen? Of course if I ever wrap up my distractions I can get around to fitting it all up to a spare knuckle to see it with my own eyes.
Printable View
Huh?
No I was referring to stock replacement Girodisc/stoptech rotors for mustang and c5 applications
Use those rotors with stock calipers as applicable is what I meant
No stoptech calipers I know of would drop onto stock rotors.
http://www.colemanracing.com/Brake-R...ane-P4670.aspx 24837 and 24838 are the rotors ill be running since thats whats on the car. A little thicker probably heavier and cheaper than the ones you were talking about. Well see how well they last. The calipers are http://www.colemanracing.com/Caliper...III-P4509.aspx 560-100
Looking at trying to make April 5-7 at Eagles Canyon for HPDE 1. Will give the car a good shakedown and start getting some seat time.
Excited. Flying to Texas today to grab the Excursion and drive to Bakersfield CA to pickup and take possession of the new race car. Will post pictures of the handshake later.
Dylan
That’s a standard asphalt circle track rotor, same as on my car. Works great with CMC cars.
The C5 rotor offset is very shallow and makes running 4 piston calipers difficult with the typical OEM wheels used in CMC....and making it under the track width max. Ask me how I know. C4 HD rotors however are just fine with tons of offset...just a lot fewer 2pc options out there.
as for the rears and knockback. I am going to try and figure out a way to put mustang cobra rear calipers on the camaro this offseason. 95% of camaro knockback is coming from the rear. If the mustang calipers don't have enough "thickness" for pads and the camaro rear rotor I plan on finding a "wider" rear caliper with twisting in pistons and creating a hybrid flange bracket to make it work while I am installing new axles.
Hell, I just built a 4th gen, 4 piston, radial mount front kit for under $900 and made 8 hours at CoTA on about 1/8" of pad wear and the rotors are $38ea availabe at rock auto or amazon. Just isn't CMC legal on track width with 10 spokes. will be trying other wheels in our inventory shortly.