Check the air filter. All of the stock Boxters sucked in a bunch of water in the rain and were making less power than the Miatas. I've been told some of the maf cars don't like the oiled K&N...
Type: Posts; User: dtanker65
Check the air filter. All of the stock Boxters sucked in a bunch of water in the rain and were making less power than the Miatas. I've been told some of the maf cars don't like the oiled K&N...
I think you are allowed two not ready. I have driven around with the scanner attached and kept checking until it was down to two and then have it inspected again.
Suspension binding?
You had a solid drive at Nola and made it to the podium. Now you have a Storm Trooper motor and you are up against the entire CMC field at Hallett. 2016 is far from over buddy, you are going to be...
So true. I can still remember my wife's first reaction "oh you decided to build a racecar, what a wonderful idea" If you believe that please call me because I have an investment opportunity that...
Don't forget the heat, a Home Depot Mapp torch is good for this.
Grind a small divot in the center of the broken bolt with a small Dremel carbide burr so the drill starts centered. Drill a shallow hole with a cobalt bit for an easy out (the stubby snap on easy...
Illicit Motorsports seems to be able to assemble a trouble free box. AI/CMC shop as well fwiw.
I would to learn more about injectors if anybody is in the know. After Sean's hydraulic lock from a stuck open injector, I am thinking replacing malfunctioning injectors with new ones is the safest...
Same here, a big 75/25 and argon bottle, I take the empty to Airco and they give me a full one. Getting a re-fill is a pita. My experience with small bottles is that they only run out after 5pm or...
Good advice.
Crappy looking welds are okay as long as they get full penetration!
Get ready for a great experience Rob! I have made the trek several times, the opportunity to meet Chuck Yeager, Bob Hoover and Paul Poberezny was very special. Pitching a tent at Camp Scholler and...
When I saw Sato limping in with a broken wishbone, I figured he was done. I was very impressed how you guys got the car back together with only losing 3 laps and the driver had enough confidence in...
Be careful with the chemicals fellas, their effect is cumulative. The hotter the solvent, the easier it absorbs through your skin. Brake cleaner is great, but don't use it unless you need to. Wear...
Way to go Glenn! I went back and finished my degree in 99 when I was between careers after bouncing back an forth over the years between work and school, I think it only took me 13 years and 11...
That's the spirit!
My first car was a 70 Cuda, based on my spectacular natural driving ability at 16, Dad said no big blocks or 4 speeds if I wanted his help with it. It was a beautiful car.
I eyeballed the gap and carried spare points, got me and the Cuda through high school. After that the Plym Fish had to go if I wanted continued sponsorship.
Priceless experience! Yours may be the only kids of their generation to be able to adjust idle mixture and set points :-)
With Glenn 100%, 4 wheel discs are a must, adios the single master cylinder. Classic performance products sells a corvette style small bore master cylinder that has good feel without a booster. I...