FS: 1999 Trans Am American Iron Race Car CHEAP $11,000!!!!

[ledfoot2]

I hate to do it, but this economy is hitting my pocketboot too much to keep the car right now. The sad part is, it is just finished sorting out. It is ready to go for the 2009 NASA American Iron season.

I have a ton of pictures. Here are a couple ones from Harris Hill Road in San Marcos Texas.

Email me at rayman@openarmsagency.org or give me a call at 361-548-8373 if you want more information.

The car is fully sorted out. I had a rough time with it last year and completely rebuilt the motor a second time and it is solid and mean sounding now!

At TWS in August the car weighed about 3200lbs without me in it. I have pulled another 50lbs or so out of it since then. It still has door bars and the original rear glass, so more is left to take out.


Here are the details:

-1999 Trans Am

-completely rebuilt LS1 with LG Motorsports G5-X3 cam, double would springs, titaium retainers and seats, LS-6 heads,
LS-6 intake, all new bearings, rings, ported Katech oil pump, SLP double timing chain, new waterpump, brand new Turn One power steering pump, long tube headers into dual 3" exhaust with 3" flowmasters for quiet tracks(less than 95db with the mufflers) or straight pipes out the back. This motor should be putting out around 410-420rwhp. I was going to run a restrictor plate in AI.

-custom full cage with doorbars on both sides built by the infamous Landrum/Warren gang

-new strano swaybars front and rear

-new Koni adjustable shocks front and rear, Eibach Pro-kit

-C5 front brakes with Carbotech XP-12 pads and cooling ducts(No hose yet)

-Kirkey Delux Road Racing seat with Blaine fabrication cage mount

-new camlock G-Force Pro harness

-Momo steering wheel with quick release and Blaine fabrication mount

-custom aluminum T-Top repalcement panels

-1 set of 17x9.5 black ZR-1 replica wheels

-1 set of 18x 9.5 silver aftermarket wheels (the ones in the pictures)

-Optima redtop battery

-Cool suit setup with shirt















Here is a video of the car idleing in the shop....sounds good.
http://www.youtube.com/watch?v=yW-W2tfQwjg

Here is a video from 11/8/08 at Harris Hill Road. I posted the one with a little spin in it for fun. I was running in a class of Z-06's, Twin Turbo 911's and GT-2's on two year old Hoosiers....not the best game plan. But the car ran perfectly.
http://www.youtube.com/watch?v=k4V4K...eature=channel

Here is a run on the dyno recently. The car dyno'ed 368hp to the wheels, but the computer was just disconnected at the master switch. It was picking up over 20hp on each run as it recalibrated itself. It should be a tad over 400rwph, they just wanted to charge me for three more runs and I didn't have the cash.

I garantee it will dyno more than 368rwhp.

http://www.youtube.com/watch?v=PUjHN...e=channel_page

[ledfoot2]

The car still needs to go guys. I will race it until it sells. Make me an offer. I will drop the price to $14,000.

[ledfoot2]

Merry Christmas everyone.

I really need to sell the car. It is ready to go, and will be running in PCA and NASA events in the next months.

I will lower the price to $12,999

This car could very easily be an AIX car if anyone wants to run it in that class too.

Of course I have more than 12.9 in the car, but we all know how that story ends.

Email me at rayman@openarmsagency.org or give me a call at 361-548-8373 if you have questions. Anyone is welcome to come and check it out. I can help with transportation too.

[ledfoot2]

PRICE REDUCED TO $11,000!!!!!

[Todd Covini]

WOW....What a Bahgain!
I'm surprised the LAW Motorsports Conglomerate hasn't added this to their inventory just yet.

[ledfoot2]

I think they need an AI car to fill out the stable. Work on them for me!

[mitchntx]

When it gets to $2K delivered, then I'm in.

Good luck, Raymen. The economy is tough right except for those in the oil biz.

[AI#97]

PRICE REDUCED TO $11,000!!!!!

had the ex-wife not cleaned me out...This would already be in my garage!

Good luck man!

[ledfoot2]

Thanks guys. I really hate to sell it, I just got it all finished and sorted out.

If anyone knows someone that might want it please let me know. I can help with transporting it too.

I am probably going to run it in a PCA event in the valley in 1/17. I will try to get some more footage of that event. It is running strong now.

[silversvo]

When it gets to $2K delivered, then I'm in.

Good luck, Raymen. The economy is tough right except for those in the oil biz.

GOODLUCK on the Sale. I would love to have an AIX car like yours, I just dont have the funds or the time... As you can see I am trying to find someone to take my car to the dyno for me incase I come home and make the first race which I doubt will happen.

As for the oil biz, it isnt doing that good... Land rigs are being stacked left and right and a major drilling company here in Texas just laid off over 650 employees. I work in it and it is tough here due to the economy. I am happy to have a job.