Results 1 to 4 of 4

Thread: FS: 1995 Mustang GT CMC race car "Barney"

  1. #1

    FS: 1995 Mustang GT CMC race car "Barney"

    Barney is ready to be repatriated back to Texas!

    1995 Mustang GT Camaro-Mustang Challenge race car: $8200 obo
    Muscle Mustangs & Fast Fords project car (Jan.-May 2009), finished second in class at 2008 NASA Nationals, 3 wins, 2 seconds in 7 races in 2008
    Ground-up rebuild from bare chassis completed in July 2008

    Chassis
    NASA logbook
    Clear Texas title (car is not street-legal)
    Six-point rollcage with NASCAR-style door bars and dash bar
    Welded Maximum Motorsports full-length subframe connectors
    Stripped and painted interior and front clip
    Relocated battery

    Suspension/Brakes
    Maximum Motorsports race-valved Bilstein struts and shocks
    MM caster/camber plates
    MM adjustable tie-rod ends
    MM Extreme Duty rear lower control arms
    FRPP upper control arms
    1050 front/250 rear springs
    Offset delrin front control arm bushings
    2003 Cobra steering rack (new in 2008) with MM aluminum rack bushings
    Cobra PBR calipers with Brembo rotors, front; SN95 Cobra rear
    Note: the car was formerly raced in the American Iron series and still has welded mounts for MM torque arm crossmember and adjustable rear sway bar (parts not included)

    Engine:
    Dyno’d at 225/294
    FRPP 5.0L short-block
    E7 heads, HO roller cam
    SN95-style induction and intake manifold
    Painless Performance wiring harness modified to run A9L EEC-IV computer
    SN95 exhaust manifolds, BBK X-pipe, open exhaust with turndowns
    C&R aluminum radiator
    Fox-style FEAD with underdrive pulleys
    3G 130amp alternator
    Canton Accusump

    Drivetrain

    Liberty Gears-built T5 with 2.95 1st gear and Astro Performance 0.79 5th gear, B&M shifter
    Stock clutch and flywheel
    FRPP aluminum driveshaft and driveshaft loop
    8.8-inch rearend with FRPP 3.55 gears
    Detroit TrueTrac differential
    Moser 31-spline axles

    Safety/Other

    AIM Mychron 3 Gold Auto data logger/digital gauge (oil pressure and water temp, plus RPM and wheel speed currently logged)
    Sparco Evo 2 seat
    MOMO steering wheel with Sweet QD coupler
    Safety Solutions rightside net
    Racetech FIA-approved six-point harness (valid thru 2011)
    Handheld fire extinguisher
    Lightweight American Racing 16x8-inch wheels (17 pounds per)

    Negotiable spares:
    Hawk DTC brake pads (two sets front, one set rear)
    MM race-valved Bilstein struts and shocks (one season use)
    Tokico adjustable struts
    New Edelbrock water pump
    New set of Toyo R888s
    Spare T5 (zero-time rebuild from Liberty and identical to unit in car)
    Fresh rebuilt E7 and GT40 heads
    Stock short-blocks (2)
    SN95-style Cobra/GT40 upper/lower intake manifold
    MB Motorsports Competition 16x8 wheels


    Located in Milwaukee, WI. Can deliver within reasonable distance. Call 414/236-9776 or email matt@bigwagon.net for more info and photos.
    Matt King
    OH-IN/Midwest CMC 03

  2. #2
    Senior Member Carroll Shelby
    Join Date
    Mar 2006
    Location
    Spring, TX
    Posts
    3,005
    Advertise the car in the next issue of MMFF and I'm sure some of your readers who were drooling over it will scoop it up.

    LOL...I also love that the story was a self-prophecy...the car WILL sell for less than $10k !!!!

    Let's get Barney back to Texas....someone!!! ANYONE!!!

    -=- T

    PS- Mike Bell...you ready to return!?!?!?!?

  3. #3

    Photos









    Matt King
    OH-IN/Midwest CMC 03

  4. #4
    Man that is a sweet ride for that amount of money!! :shock:
    Al Fernandez

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •