Assembled Front Suspension
Remove 36mm Axle Nut
Turn Bearing over to access back side
Richard Pedersen made this trick tool at NASA, but you can also use a screwdriver between the inner and outer race to pop the rear race off.
Rear Race removed
Rear Race removed (2nd shot)
Pry on rear bearing cage to remove rear grease seal
Rear bearing cage and grease seal being removed
View of front race from behind
Use 1 1/8" socket to tap out front race
Remove front race.
Pop out each of the ball bearings from the front bearing cage with a small flat blade screwdriver.
Clean everything with brake cleaner so you don't mix grease
Regrease with your favorite synthetic racing grease
Reply With Quote
Bookmarks