Results 1 to 8 of 8

Thread: MSR-H Tire Selection for AI (RA1's or RR's)

  1. #1
    Senior Member Carroll Shelby marshall_mosty's Avatar
    Join Date
    Mar 2006
    Location
    Denton, TX
    Posts
    3,333

    MSR-H Tire Selection for AI (RA1's or RR's)

    All,
    I've sent out an email to everyone I can think of from an AI prospective. Here is a tally of everyone that has responded.

    Okay to use RA1's
    David Armstrong
    Brian Cook
    Jim Dulaney
    Casey Holdway
    John Linton
    Mark Lopilato
    Mike Montgomery
    Marshall Mosty
    Richard Pedersen
    Eddie Rock (might not make it)
    Mark Smith
    Mike Stacy


    Registered that we still need to hear from
    James Strader

    Not registered, but on AI roster and have competed in the past few seasons
    Dave Neary
    Frank Robertson
    Mike Snavely
    Todd Covini

    Not making the event
    David Donovan
    Mike Patterson (will be there just without a car)
    Dave Kagan
    Last edited by marshall_mosty; 12-21-2013 at 10:59 AM.
    Marshall Mosty
    AI/SI Texas Regional Director
    2011 NASA-TX American Iron Champ
    AI #67 "Mosty Brothers' Racing" (RIP)
    ST6 #21 Toyota Corolla (being revived)...

  2. #2
    Senior Member Carroll Shelby marshall_mosty's Avatar
    Join Date
    Mar 2006
    Location
    Denton, TX
    Posts
    3,333
    All,
    Looks like the only ringer will be Bill Swenden (ex-Zippo S197). Since Bill was on Pirelli P-Zero Slicks last year (AIX), he went ahead and bough a set of RR's to start 2014. All of you were on the email from Mark Smith regarding this, but Bill is currently not signed up since he's waiting for transmission parts and is not a 100% "for sure" entry for Houston.

    Bill will be at AI power/weight for this season to collect points. Let's think of a way to deal with this. From talking to some folks that run RR's, they might not be any faster than a RA1, so it might be a moot point. This was just trying to level the playing field 100% for the first event for sure.

    I'm open to ideas here...
    Marshall Mosty
    AI/SI Texas Regional Director
    2011 NASA-TX American Iron Champ
    AI #67 "Mosty Brothers' Racing" (RIP)
    ST6 #21 Toyota Corolla (being revived)...

  3. #3
    Senior Member Grass-Passer Suck fumes's Avatar
    Join Date
    Dec 2012
    Location
    Austin, Tx
    Posts
    911
    Me and Corey were going to run AI again as all the other cars aren't quite done yet in SI.

  4. #4
    Hi Bill, we will be there with Jack in SI although registration shows AI running RR's for what its worth

  5. #5
    Senior Member Grass-Passer MikeP99Z's Avatar
    Join Date
    Mar 2006
    Location
    EBC
    Posts
    993
    Aaron - if you and Corey register, then I think there will be 3 in SI.

  6. #6
    Senior Member Grass-Passer MikeP99Z's Avatar
    Join Date
    Mar 2006
    Location
    EBC
    Posts
    993
    Quote Originally Posted by marshall_mosty View Post
    All,
    Looks like the only ringer will be Bill Swenden (ex-Zippo S197). Since Bill was on Pirelli P-Zero Slicks last year (AIX), he went ahead and bough a set of RR's to start 2014. All of you were on the email from Mark Smith regarding this, but Bill is currently not signed up since he's waiting for transmission parts and is not a 100% "for sure" entry for Houston.

    Bill will be at AI power/weight for this season to collect points. Let's think of a way to deal with this. From talking to some folks that run RR's, they might not be any faster than a RA1, so it might be a moot point. This was just trying to level the playing field 100% for the first event for sure.

    I'm open to ideas here...
    What's Ian Powell going to be on?

  7. #7
    Senior Member Grass-Passer Suck fumes's Avatar
    Join Date
    Dec 2012
    Location
    Austin, Tx
    Posts
    911
    Yah if there's 3 then I'll be in SI. More money from ford!

  8. #8
    Humility ages....

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •