Results 1 to 10 of 65

Thread: 4th gen setup questions. . . don't be stingy!

Threaded View

  1. #32
    Senior Member Carroll Shelby
    Join Date
    Mar 2012
    Location
    Houston
    Posts
    1,449
    Blog Entries
    2
    Reading through this thread and others, I feel like I may be doing a number of things wrong:

    Tire pressures: running mid-high 20s starting. This too low?

    Spring rates: Went up to 750F/250R from 600F/200R last summer, no spacers in the back. Car feels stable and doesnt seem to push, but I think it's harder to drive offline now. Running 32F/19R bars.

    Front camber: I know it's too high, can't get an accurate reading but suspect it is above 2.6*

    My pyrometer readings are showing a 20-25*F delta between the inside (hotter) and outside (cooler) of the front tires, so I will take the car to an alignment shop and back off the camber accurately.

    What should I aim for front camber/caster/toe when it's on the rack? -2.2 camber, max caster, 0 toe?

    What should my starting pressures be?

    Hoping to get to TWS this Friday to try out other variables (rear spring rate, rear spacers, tire pressures).
    Last edited by Pranav; 05-18-2015 at 11:48 AM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •