Results 1 to 6 of 6

Thread: CMC Mustang For Sale - 1986 Fox Coupe - CMC 34

  1. #1
    Senior Member Grass-Passer Wade's Avatar
    Join Date
    Jun 2008
    Location
    Bryan, Texas
    Posts
    372

    CMC Mustang For Sale - 1986 Fox Coupe - CMC 34

    1986 Mustang race car CMC 34, Texas Region. The car has a current annual inspection for 2015 and has been run most recently at TWS in April 2015. Selling due to family commitments. I hope to return to the track in a few years when my daughter is older and it can be a family event. I still have my weekend toy so I don't plan to be a stranger.

    The car has all of the usual race car bits that you would expect in the class. It has dynoed 255 hp/290tq consistently with the same restrictor plate for the last three years. It will certainly make more power and torque with the plate removed, or a larger plate. I did not spend the time to test the limits. I also did not invest the time/money to run fast up front or be competitive, but that does not mean that this car is not capable. I feel like it is a few small setup changes away from running with other Foxes currently at the front with the right driver.

    13" Cobra/PBR brakes
    8 MB Weapon wheels, 17x9
    T5 with road race 5th gear
    Aluminum drive shaft with safety loop
    Steeda short throw shifter
    306 cu in small block, professionally built
    Canton road race oil pan, 7 quart capacity
    GT40 heads
    Recently upgraded valve train
    Cobra upper and lower intakes
    24 lb injectors, Mass Air Flow meter, Cobra ECM
    8.8" rear with Torsen T2R, aftermarket axles, ARP long wheel studs
    Maximum Motorsports panhard bar
    Maximum Motorsports lower control arms with adjustable perch
    Six point roll cage, .120" wall DOM, subframe connectors
    Painless wiring harness. All unnecessary wiring has been removed. Car does have operable windshield wipers.
    Moroso battery box with Optima Red top
    Ultra Shield road race aluminum seat. 16" if I recall correctly.
    Window net and right side safety net
    Autometer gauges, including memory tach
    Florida 5.0 vacuum molded gauge cluster
    Momo steering wheel with quick release/disconnect. Device only allows single direction of installation, so there is no fiddling with spline alignment
    Steel flares in the rear, fiberglass flares in front to allow for max track with per class rules
    Minimum class weight is 3100 pounds. Car weighs 3120 with 180 lb driver.
    Maximum Motorsports camber plates
    BBK Headers
    Bassani X pipe
    130 amp 3G alternator conversion
    Big Griffin aluminum radiator
    CoolShirt cooler setup
    AMB wired transponder

    I have a title for the car.

    I also have a Texas Rollback quickload trailer that I will consider selling with the car for the right price. Will NOT sell trailer without car. If you are hunting for a race ready package deal, I also have a 2006 Chevrolet Duramax/Allison crew cab 4x4 that could go with the deal for the right price. I am not even a little bit interested in selling the truck or trailer without selling the car.

    I have a lot of spares, including an entire chassis with title that can also be worked into the right deal.

    Let me know what questions you have. I have a few hundred additional photos, so let me know if there is not something shown that you want to see. These photos are current (less than a week old 2015.07.31) and this is exactly how the car looks at this time. It runs and drives well, and is ready for the track this season. Like most race cars, it is not perfectly straight or without history, but it is solid. No, you can't "build one yourself" for this price. Not even close.

    Willing to deliver and/or meet halfway in the US in exchange for gas money. Again, if the deal is right.

    Taking offers. Asking $9,500 to get you in the ball park.
    979-seven seven seven-3419
    wade dot zimmer at gmail dot com

    https://drive.google.com/folderview?...DA&usp=sharing
    Last edited by Wade; 08-02-2015 at 09:09 PM. Reason: Added Contact Info
    '86 Mustang Coupe - CMC2 34

  2. #2
    Senior Member Grass-Passer Wade's Avatar
    Join Date
    Jun 2008
    Location
    Bryan, Texas
    Posts
    372
    SOLD. Car will stay in Texas. Look for it soon on a track near you!
    '86 Mustang Coupe - CMC2 34

  3. #3
    Senior Member Carroll Shelby Fbody383's Avatar
    Join Date
    Aug 2006
    Location
    Pearland, TX
    Posts
    3,269
    Well, it sucks it won't be you and The Pasta Dude driving it... but congrats and we'll look forward to having that cheater mustang back out with us. Remind him/her it's customary to bring enough beer for the group their first event.
    #39 CMC Camaro
    Orange is Fast!
    CMC-NT01 FTW!

  4. #4
    Senior Member Grass-Passer Wade's Avatar
    Join Date
    Jun 2008
    Location
    Bryan, Texas
    Posts
    372
    You guys will like Daniel, and yes it will be good to see the car on track more than I have had it there in the last two years. Raising a child blah blah. :-)
    Like you Dave, Daniel is an M3 fanboy and also has an E30 Chump/WRL endurance car. Unlike you, he doesn't like to hit things. Zing! I'm hoping to still make an appearance at most events to hang out and lend a hand. I hear he does like beer....
    '86 Mustang Coupe - CMC2 34

  5. #5
    Senior Member Carroll Shelby Fbody383's Avatar
    Join Date
    Aug 2006
    Location
    Pearland, TX
    Posts
    3,269
    Quote Originally Posted by Wade View Post
    Unlike you, he doesn't like to hit things. Zing!
    {cough}Houston. Wall.{cough}

    And I remember a certain "avoidance" at TWS, starting around 3:00... https://vimeo.com/93332274

    Welcome Daniel. Car will treat you right... even if we don't.
    #39 CMC Camaro
    Orange is Fast!
    CMC-NT01 FTW!

  6. #6
    Senior Member Grass-Passer Wade's Avatar
    Join Date
    Jun 2008
    Location
    Bryan, Texas
    Posts
    372
    I had a lot of help around on that particular spin. :-p
    '86 Mustang Coupe - CMC2 34

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •