He did call MMS and whoever he talked to was hellbent on selling him some coilovers (which bumps him out of his current class). I've been pushing him the universal route as he can cut the fronts to length and he can get some dirt cheap springs from SW Speed. The rears though are flat on both ends and I'm not sure if he can get springs in 1/2" length increments to achieve the desired ride height. We were able to determine they're 5.5" in diameter and 600# linear front and rear stock. I'm thinking no more than 800# on stock shocks. What are some popular shock choices for running in the 900# range?