1999 Camaro SS, AIX, AI, ST1/2 roller, complete chassis for sale

[AI#97]

For Sale 1999 Camaro SS AIX, AI, ST1/2 Racecar, no engine, no trans, no driveshaft.
Originally a 1999 SS
Penske 8100 Remote reservoir, Double adjustable coil overs with Double Digressive pistons, custom valving. Front shocks have very recent rebuild and revalve. Rears need some attention as the rebound adjusters are bound up.
1100# front springs/275# rears with several other rates as spares
UMI k-member and lower control arms 2 years old but like new with practically new bump steer kit.
2 different front sway bars. 1.25 and 1.375" hotchkis bars, several rears available for 10 bolt rear end.
Global west front upper control arms with nearly new ball joints.
Factory front spindles with Adapters to run SKF C6R race wheel bearings and stoptech BBK for camaro. 13" stoptech kit included.
Global west rear lower control arms with heims on both ends.
Global west tubular torque arm.
Custom watts link at rear.
Quick Performance 9" ford axle housing setup to use factory LS camaro rear disk brakes. Currently has an aluminum center section that will likely be replaced with a used iron center section and 1350 Yoke.
Has new 1 year old aluminum racing radiator with dual electric fans.
10 point cage tied into a-pilars for NASA. Logbook from 2006. Last tech'd 2015.
22 gallon ATL fuel cell, bladder installed 2016.
Painless wiring harness and 99 LS1 ECU included with chassis.
Full aero package with fulcrum motorsport splitter and rear wing.
VFN fiberglass lift off hood and VFN lightweight fiberglass doors.
Tick Performance Clutch master cylinder and -an line.
Sheilds Lexan windshield with anti scratch coating in great shape, rear formed lexan slightly yellowed but not cracked.
Will include the practically new 1-3/4" ceramic coated headers for LS1/2's and full Dr Gas oval X pipe exhaust.
Floor pan behind front seats has been modified to accommodate the ford 9" per the American Iron rules and there is a "firewall" built to hold a 3 gallon dry sump reservoir.
Raceweight with LS1 and T56 with 1/2 tank fuel and no driver was around 2940#
Will include 1 set of ZR1 replica wheels, 17x9.5 with Toyo 275/40/17 RA1's ONLY. 3 pc racing wheels in photos ARE NOT INCLUDED.
Car is currently FM3 Panther Pink so you can't be missed on Track! Rallye Stripes and Hockey stripes are 3M Carbon Fiber look vinyl. #'s will be removed prior to sale.
Reason for sale is the Current dry sumped 650hp LS2 and jerico are being removed and put into another chassis.
You will need an LS motor complete with accessories, transmission with bell housing, clutch and shifter and misc gaskets and maybe patch the trans tunnel for a shifter boot.

This is a well developed car and is ready for a new owner to go race with little work if you already have an LS driveline and want to go racing with not a lot of wrenches to turn. Asking $10,000. Located in College Station. Car is currently in track ready condition. Need 10-14 days to have ready for sale. Contact here by PM or by email at matt AT aggie97 dot com