Trailer - 3600 vs 5200 axles?

[Pranav]

If you are able to get into more detail/control over choosing your axles on the new trailer, get them with e-z lube snouts.

I used to run\ regular snout axles and had a "bearing buddy" on each hub that would apply grease+pressure to the outer bearings. This is good for dipping axles in water on boat trailers, but is not a substitute for keeping the inner bearing greased well like you can with an E-Z lube axle end.

I used to take my hubs apart every season and a half or so, not sure if I'll do it as frequently now that I switched to E-Z lube axles; I pump them full of fresh grease every few tows or so.

I think Pranav carries one on his trailer now

Under:
https://goo.gl/photos/ZYpJPp83EPYRj8Cp7

...and a fully dressed brake/drum/hub assembly in the box!