best Mustang brake cooling kit

[ShadowBolt]

The kit that is on the 55 is a hack-job that was on the car when I got it from Tony. It blows on the inside of the rotor and not in the center like it should. I have never had a brake cooling issue but since I lost the right side hose and sheet metal duct I thought I would get a new kit. The Kenny Brown

http://store.kennybrown.com/product/...-and-svt-cobra

looks great but it's high. This kit is less money but does it work as well?

http://fulltiltboogieracing.com/imag...ene%20Hose.jpg

Anyone know a good brake cooling kit that will work with the Stoptech big brakes? It's possible neither one of these will work.


JJ

[Suck fumes]

i run agent 47 but it'll rub the tire if you turn to sharp.

[drecords]

Jerry -- I bought a universal circle track type duct from Summit awhile back that I'm planning on adapting to fit #34. Might get around to that this weekend, I'll post some pics here. Backup plan was the Agent 47 setup.

[blk96gt]

I have the Agent 47 setup as well.

[mach1]

homemade made out of sheet alum and 3" 6061 pipe, no help here

[Tilton]

I also have the Agent 47 kit and ended up buying longer bolts to move the plate closer to the rotor (still needs to be closer). The supplied hose isn't that great and will rub through pretty fast so I bought a long section of double walled hose from Pegasus Racing and tried to ziptie it out of the way a bit better. You can see it still rubs a little, but not as much and not all the way through.

https://www.pegasusautoracing.com/pr...p?Product=3631

[Casey_SS]

Craig was kind enough to point me to this place as a MUCH cheaper source for brake ducting and assorted other stuff - http://www.aircraftspruce.com/pages/ep/ducting/scat.php. Nearly half what Pegasus charges for the same thing...