Results 1 to 10 of 32

Thread: LT1 trouble shooting help

Hybrid View

  1. #1
    Was hoping to be able to hook it up today but nice, waiting the cable. Should know being in Wednesday or Thursday, will know more then.

  2. #2
    Senior Member Carroll Shelby Supercharged111's Avatar
    Join Date
    Jun 2014
    Location
    Colorado Springs, CO
    Posts
    1,149
    Are you using all OEM ignition components? Any aftermarket bits are garbage. ICMs especially, Blow Reilly's will sell you the same POS for a 93-97 LT1 and GM spec'd 3 different ICMs: 93, 94-95, 96-97. They all have different curves and none of them match the aftermarket stuff from what I've read. Now an ICM is more of an item that either works or it doesn't, so doubtful it's the smoking gun for this but I am inclined to leaning toward wiring or electrical/engine management if the compression is solid. We had an LT1 here that also had a bad pigtail for the coil so the car would just randomly die and gave no indication on the scanner WTF was going on.
    RM CMC Director

  3. #3
    ICM issues are what led to us doing the LS1 swap. I never figured out why but the car was eating them every two sessions. The ACDelco ones would last longer. They all exhibit the same symptoms though, I would loose ignition for a few seconds once, then about 10-30 minutes of track time later it would go out completely. It was a contributing factor to the grass fire at TWS (along with leaking oil and my stupidity of putting in the grass). The last time it happened the car back fired horribly, ringing ears and all. Did it again when I tried to fire it at the shop.

    I wanted to try this kit, but adjustable timing is against the rules.
    https://www.jegs.com/i/MSD-Ignition/121/83811K/10002/-1

    I just now found the piece parts I *think* you need to eliminate the ICM by itself. Not sure on the rules status of it but in the spirit of the CMC rules I'm going with illegal. If I had found them earlier maybe I would have tried them out.

    Pig-tail
    https://www.jegs.com/i/MSD-Ignition/121/8876/10002/-1

    Digital ignition
    https://www.jegs.com/i/MSD-Ignition/121/6425/10002/-1

    - Josh
    CMC #50

  4. #4
    Senior Member Carroll Shelby
    Join Date
    Mar 2012
    Location
    Houston
    Posts
    1,449
    Blog Entries
    2
    Quote Originally Posted by Sook View Post
    ICM issues are what led to us doing the LS1 swap. I never figured out why but the car was eating them every two sessions. The ACDelco ones would last longer. They all exhibit the same symptoms though, I would loose ignition for a few seconds once, then about 10-30 minutes of track time later it would go out completely. It was a contributing factor to the grass fire at TWS (along with leaking oil and my stupidity of putting in the grass). The last time it happened the car back fired horribly, ringing ears and all. Did it again when I tried to fire it at the shop.

    I wanted to try this kit, but adjustable timing is against the rules.
    https://www.jegs.com/i/MSD-Ignition/121/83811K/10002/-1

    I just now found the piece parts I *think* you need to eliminate the ICM by itself. Not sure on the rules status of it but in the spirit of the CMC rules I'm going with illegal. If I had found them earlier maybe I would have tried them out.

    Pig-tail
    https://www.jegs.com/i/MSD-Ignition/121/8876/10002/-1

    Digital ignition
    https://www.jegs.com/i/MSD-Ignition/121/6425/10002/-1

    - Josh
    I wonder if this and and good clean Opti is all that's needed to make an lt1 run right?

    ICMs gave me some trouble too early on.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •