You did measure fuel pressure and check the fuel regulator not leaking? Might not hurt to pull the fuel rails and make sure there is nothing in them.
You did measure fuel pressure and check the fuel regulator not leaking? Might not hurt to pull the fuel rails and make sure there is nothing in them.
#39 CMC Camaro
Orange is Fast!
CMC-NT01 FTW!
From what I have seen the fix for a LT1 is an LS1 swap. In the Ford camp we are working the 4.6 and the 5.0 hard to get to the current CMC numbers. The LS1's are just coasting at CMC power levels. If I could drop an LS1 in the 55 I would be all over it. I know this is not the answer you are looking for but I would not spend much money on trying to fix a LT1.
JJ
Check the float bowl levels
So i was finally able to get the computer to read the PCM using a pretty basic program call Scan9495. It was extremely easy to use. The issue I was running into was simply that whoever wired the car did not care to reconnect the serial data wire so it was cut in the middle of the wiring. That took a while of banging my head against the wall thinking I had done something wrong with the software. I grabbed a few screen shots of the data. What stands out to people. I expected to have several fault codes. Unfortunately I thought it would save the list of the codes but it did not. I will screen shot those while it is logging tomorrow.
Bookmarks