I can cut them but the material is available in gauges. 8 ga is .164" nominal but can be from .156" to .172" It will be closer to .160". 7 ga is .179" nominal but can be from .171" to .187". It will be around .176". This is in mild steel. If we go stainless the gauges are dead nuts. 7 ga is .187" and 8 ga is really not available except in small pieces from like McMaster-Carr. Very expensive. I'm guessing we could laser cut some from a sheet of 3/16" (.187") then have someone mill them down.


JJ