Add to that a bell housing, clutch, shifter and a fair chance you'll shorten the driveshaft. Recommend REM polishing and using Tremec fluid
Add to that a bell housing, clutch, shifter and a fair chance you'll shorten the driveshaft. Recommend REM polishing and using Tremec fluid
I think summit has them in stock. I usually check their stock when we race at Cresson because... well... CMC car.
Going between T5 and TKO on mine is trans, shifter, bell housing, sometimes shimming the clutch pivot. You'll need a 26 spline clutch for the TKO600. My driveshaft and trans mount work for both, that may be different on an sn95.
I've had the T5z and the TKO in and out of the car several times this season.
- Josh
CMC #50
Dederich might also have a 600RR for you.
http://www.dederichsmotorsports.com/...transmissions/
- Josh
CMC #50
I forgot about the shifter, thanks.
Now this is starting to feel like racing. Trans change is half the cost of the car. I am hoping I won't have to alter drive shaft as I would like to get the t5 rebuilt better for a backup.
Dederich is close to me so I will go talk to him first.
Thanks guys!
Oh it’ll be much more than that if you allow Sean to decide which parts need to be replaced.
Al Fernandez
RM CMC Director
Bookmarks