Results 1 to 2 of 2

Thread: LT1 F Body parts

  1. #1

    LT1 F Body parts

    LT1 F body things that I don't need any more, but that you should scoop up as spares! All of this is less than 50c on the $.

    Reman steering rack, one race weekend old: $80
    Turn One power steering pump, with pulley, used but no leaks or squeals: $100
    Canton road race oil pan, well used but serviceable: $200
    Water pump: $40
    Opti, delco, vented model used but no misfires: $40
    Opti, new in box, vented: $100
    Opti wiring pigtail: $10
    Clutch master, slave, connected by a proper length braided hose: $60
    Clutch disk and pressure plate, well used but looks really good! $40
    starter: $60
    alternator: $60
    Ignition module and coil and the mounting bracket for quick at track troubleshooting: $40
    exhaust manifolds, pair, cone style, with heat shields: $40
    set of heads with valves, springs, etc, as taken off, ran fine (no blown gaskets or overheated): $200
    Block, rotating assembly, heads, intake with injectors, as it ran (no blown gaskets or overheated): $400
    flywheel, stock: $40
    flywheel, not stock, not CMC legal: $60
    T56 with bellhousing, no shifter: $800
    Al Fernandez

  2. #2
    Senior Member Grass-Passer y5e06's Avatar
    Join Date
    Mar 2006
    Location
    East of Driftwood
    Posts
    502
    uh, I'll take the manifolds... see email. think i'm going to need these shipped though.
    Dust Collector

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •