2019 Post Race tech report

[drecords]

Just wanted to give everyone a clear insight into the Tech inspections / results from the 2019 events. As always, if there are any suggestions of items you want inspected on any platform, please let me know and I will add it to the inspection list.

Cresson - March 2019

Race 1 - No Contact
Tech inspected restrictor plate size. All passed. (Bryan Curtis, Josh Sooknanan, Dan Allford, Kevin Jander)
We did clarify the plate does need to be a measurable exact circle with size noted on the dyno sheet.

Race 2 - Contact with Jander front / Curtis rear, no deviation in position.
Tech inspected track width. John Martin, Aaron McSpadden, Michael Mosty, and Bryan Curtis all passed but two individuals were at the absolute max width. Just a reminder than an extra 1/16" would have been a DQ so please double-check your width.

Race 3 - Contact with McCormich LF / Patterson RR. Both had some damage, deemed a racing incident.
Tech inspected for a stock flywheel. All passed. (Aaron McSpadden, John Martin, Josh Sooknanan, and Michael Mosty)

Race 4 - No tech and no contact that I am aware of.

Out of curiosity -- with the trans installed on the car how did you guys check the flywheel?

[michaelmosty]

On most of the cars we pulled the starter and on one of the cars there was an access hole at the bottom of the bellhousing where we could get a telescoping magnet in to the flywheel.

[mach1]

I think this is great, thx for posting Michael!

[Al Fernandez]

Nice work
Good to for folks to have insights into the tech activity.