In that situation I had cables caught up in my feet and I have a bad track record of mistakes when distracted.
Id say the fords are less forgiving, the first time I drove a 4th gen I was surprised at how forgiving it was.
It's all in the car setup and what shocks you have. The mustang can be more frustrating with the stock quadralink while the F-body can be a PITA with bad shocks. good shocks and playing with springs on the F-body scores BIG gains but I think the mustang is better on the brakes....and that is the ONLY advantage I haven't worked out yet on the F-body within CMC rules.
Ah, fugg it.
Well regardless, the Fords definitely work in TX. They seem to do pretty well on the east coast too. This is where the whole amateur racer spread of skill comes into play, I guarantee if Bryan's motor hadn't gone low on oil pressure he'd have been on the podium. Check out how nats went last year too, the big variable there was an out of class douche in a BMW racing himself while fast racers who'd gotten DQ'd were trying to reel back in. Based on how COTA went, I observed no dominant platform (IMHO). There were too many variables in that race to truly decide if one platform had an advantage over another, but that was at a very unusual track for CMC from what I could see. If we rewind to Hallett last year, Bryan did complain of his car fading late in the race, though I suspect Mosty's was too. It's hot as balls down there and driving style also plays a huge role as does the personality of the loose nut behind the wheel. I know by the time I'd cleared Al and Dan my car was friggin done, even the clutch started slipping in the final after John Martin had made his move that I somehow managed to hold off.
RM CMC Director
My car picked up a wicked push at about 25mins that really slowed me down. Idk if I missed tire pressure or something else was going on, pressures we're decent post race but it just wouldn't turn in anymore. But it didn't turn off for the whole race which I'll put in the Win column.
Daniel Records
CMC # 34
Something changed. It could be something on the car (knocked toe or slipped camber, etc.) but more than likely the push was there a bit all weekend and you just fried the fronts to cause an imbalance with the rears. See if there is a difference in tread depth front to rear. We've had it happen on the Orange car. That's why I'm so aggressive with changing car setup early in the weekend to suit the track conditions. Fresh tires fix all...
Richard P.
Keep in mind the 4th gens that routinely challenged and beat the mustangs aren't actively racing any longer in Texas. I'd like to change that sometime in the next year but other priorities are keeping me away from bringing Glenn's old car out and hopefully making a few of the guys at the front at least break a sweat. I would need a few weekends of testing in CMC trim (mostly brake package and weight changes) to get to know the RR and I just have not had the time. One thing about the car setup right now is it only fades in HOUR 5 to 6 of 8... 45 minutes should be a breeze.
Ah, fugg it.
Yeah, I WANTED a spot on the podium myself this year and came up short on the racer side of the house. Can't guarantee an improvement on that next season, but I can guarantee efforts on said improvement on my racing program between now and then. We shall see how that shakes out and long live the LT1! To Hell with the cheater Fords!
RM CMC Director
Something I started doing this year after the Cresson event was make track notes for an entire lap with all details of brake markers, turn in, track out, gear selection, track placement, etc. About 1/2 way through the Cresson event I realized I was doing Ricochet totally wrong and with notes I can start next year where I left off this year. I also thought through some places where I will try some different gear selections at next years event.
Also good to do the same thing Saturday night to better prep the Sunday sessions.
-Michael Mosty
CMC #11 Mosty Brothers' Racing
Director - TX Region
Bookmarks