Results 1 to 5 of 5

Thread: 00 Camaro Shell

  1. #1
    Senior Member Carroll Shelby
    Join Date
    Feb 2007
    Location
    Plano
    Posts
    1,983
    Blog Entries
    2

    00 Camaro Shell

    About finished parting a red 14k mile 2000 Camaro SS. I'm about ready to pull the doors off and maybe windshield. The passenger side quarter panel and rockers are perfect so wondering how hard it is to drill the spot welds and pull those out or use a sawzall.

    If anyone is interested in those parts or the shell let me know. It's hit across the nose so the front frame horns and inner fenders are twisted then it spun around and hit the left rear quarter. The doors however are perfect.

    Also considering just scrapping it Saturday to make some room.
    Bryan Leinart
    CMC #24

  2. #2
    Quote Originally Posted by BryanL View Post
    About finished parting a red 14k mile 2000 Camaro SS. I'm about ready to pull the doors off and maybe windshield. The passenger side quarter panel and rockers are perfect so wondering how hard it is to drill the spot welds and pull those out or use a sawzall.

    If anyone is interested in those parts or the shell let me know. It's hit across the nose so the front frame horns and inner fenders are twisted then it spun around and hit the left rear quarter. The doors however are perfect.

    Also considering just scrapping it Saturday to make some room.
    Sawzall with some extra, it took me quite a while to get the quarter off the mustang neatly.

    - Josh
    CMC #50

  3. #3
    Senior Member Carroll Shelby Fbody383's Avatar
    Join Date
    Aug 2006
    Location
    Pearland, TX
    Posts
    3,269
    Plasma or oxy/acetylene torch...

    Let us know how much PITA the quarter is; we're in the same boat with a shell.
    #39 CMC Camaro
    Orange is Fast!
    CMC-NT01 FTW!

  4. #4
    Senior Member Carroll Shelby
    Join Date
    Feb 2007
    Location
    Plano
    Posts
    1,983
    Blog Entries
    2
    I would rather give it to someone like Procter did for me as it’s the same side I needed. But I don’t have space to store it living in The Burbs.
    If someone wants it please speak up as odds are it and my junk pile are going to scrap Saturday morning to make room.
    Bryan Leinart
    CMC #24

  5. #5
    Senior Member Carroll Shelby Supercharged111's Avatar
    Join Date
    Jun 2014
    Location
    Colorado Springs, CO
    Posts
    1,149
    I bought 2 used quarters from a fellow racer who drilled out all the spot welds to remove them from the shell. He said it was tedious and took a couple bits, but I can attest it's doable.
    RM CMC Director

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •