Ring and Pinions - what’s good?

[Gerno]

Do y’all have any opinions on what’s some of the better ring and pinions brands and which you’d consider junk? I’m looking to rehear my car and figured it was worth asking

[drecords]

Do y’all have any opinions on what’s some of the better ring and pinions brands and which you’d consider junk? I’m looking to rehear my car and figured it was worth asking

I’ve always used Ford performance but that probably doesn’t help you.

[BryanL]

What gear are you switching too? GM gears I think are preferred but would look at Motive.

[Gerno]

What gear are you switching too? GM gears I think are preferred but would look at Motive.

Wanting to try a 3:73, current setup is just a little too much gear

[AI#97]

Wanting to try a 3:73, current setup is just a little too much gear

I don't know man...I'm looking at 4.11's but I'm hampered by the 5900 limiter. you got that extra 300 rpm I would certainly punt someone for. what rear end are you running? 10 bolt? Richmond makes a solid product as does Yukon but to be honest, at our HP levels they are all good enough. It all comes down to setup when it is installed. either way, do your best to stay slow! LOL!

[Pranav]

After 6 seasons on a 3.42 I did a bunch of analysis on my gps speed/rpms/shifts on my 6100 rpm ls and came to the conclusion that 3.90 was good for all tracks except nola, cota, and tms, for which I would need a 3.23

So I will be swapping gears for those two categories of tracks

I'll need to check but hallet looked like a 4:10 track but I'm not about 3 rear ends

Haven't had a chance to try these gears out because some dude in china ate an undercooked bat and I got more busy at work

[64GunPilot]

Do most of ya'll not use 5th gear? With 3.42 i was having to use 5th at Hallett. Im still learning the basics, but I thought 5th was a usual gear to hit. Im also still running the TPI so that might be my issue. Gerno, are you still running the 350 carb'd?

[Pranav]

Gerno and I are on the LS motors now which rev up to like 6100 ish; yeah for the tpi you are limited on rpm!

[64GunPilot]

Gerno and I are on the LS motors now which rev up to like 6100 ish; yeah for the tpi you are limited on rpm!

I got one of those lined up harness computer and all. Just need to source the intake and exhaust manifolds and whatever else I need to be legal.