When I ran out of talent and hit Dan on Sat. I bent the inner tie rod and the rod end part of the bump steer kit. I had a new SVE kit in my spares. The issue is the new kit has all right hand thread rod ends but the bent one I needed was left handed (left handed where the rod end goes and right handed where the inner tie rod goes). I borrowed an rod end from John and it had left handed threads so it worked perfect. If I use the new bump steer kit when you try and adjust the toe the aluminum adjuster will move the same on the inner tie rod and on the rod end. The only way I see to use the new kit is the take off the rod end every time you want to make an adjustment. An I looking at this wrong?


JJ