OK, good info. to know and I sure hope it never becomes legal which I doubt. The 4.6 needs it to try and get up to the numbers just like the 5.0 or TPI needing parts to get up to the numbers. Since the LT1 and LS1 have no trouble being over it certainly isn't needed.
OH-and you can certainly win races with 250 hp or races and championships with I think 283 or 288 tq like Mosty does. Especially at Hallett.
Bryan Leinart
CMC #24
250hp carrying an extra 200# because your torque is still high? I ran with ~287ft/lb in 2014 and it didn't seem to hurt me, but my hp was 260 and I didn't have to carry ballast around. With the Fords being so light, I feel it's easier for them to scrape by being low on torque but again, this is where data is king and all I have is a dyno graph.
http://i886.photobucket.com/albums/a...psxeo4h30g.jpg
Failing at inserting image directly into the post. The 55 probably shouldn't look at this... and those scales were RIGHT.
Of course I spent a lot of time chasing all the mustangs... gotta get that pig to turn.
Last edited by Fbody383; 02-04-2016 at 10:02 AM.
I can't see that on Chrome, Firefox, or my phone.
Bookmarks