I recently picked up a V8 fox from a friend and decided to do a 5 lug conversion with a bunch of parts I had laying around. This is just a stock setup so no fancy panhard or poor man's three link.

I used:

fox 8.8 housing(new bearings/seals axle & diff)
3.55 gears(new bearings)
SN95 length axles
SN95 non cobra rear brakes

I put all new Prothane bushings in the rear control arms.

Driving in a straight line the everything seems fine, no whining from the gears. When I make a turn I get some noises from the rear end of the car. It's hard to explain but doesn't sound good.

Any guess on what I did wrong?


Thanks,

Jeff