2010 Prep

[David Love AI27]

"Jeremy the drill"
"Mr. drill press"
"The perforator"
"Highspeed"
"Hole"

"Highspeed".... EVERY person who walked up there... the first words out of their mouths was: "HEY!! SLOWDOWN!!" my side was already hurtin' when Dr. Frank walked up and said the same... it took alot of effort not to spew beer out my nose... especially with the "snort" in the background...\

GOOD TIMES!!

[AI#97]

"Jeremy the drill"
"Mr. drill press"
"The perforator"
"Highspeed"
"Hole"

"Highspeed".... EVERY person who walked up there... the first words out of their mouths was: "HEY!! SLOWDOWN!!" my side was already hurtin' when Dr. Frank walked up and said the same... it took alot of effort not to spew beer out my nose... especially with the "snort" in the background...\

GOOD TIMES!!

If it's easier for everyone NOT to try and remember 30 different goofy nicknames for him, I just call him "dumbass" which pretty well covers ALL the other nicknames with plenty of color for fun.

[rpoz27]

"Jeremy the drill"
"Mr. drill press"
"The perforator"
"Highspeed"
"Hole"

"Highspeed".... EVERY person who walked up there... the first words out of their mouths was: "HEY!! SLOWDOWN!!" my side was already hurtin' when Dr. Frank walked up and said the same... it took alot of effort not to spew beer out my nose... especially with the "snort" in the background...\

GOOD TIMES!!

I thought I was going to cry at that point. :lol:

[jeremiahkellam]

when the wheels are off, make sure you put the lugnuts back on to ensure the rotor is not "cocked" on the hub. 4th gens are like this and it makes a difference when checking for "free wheel" of the rotor.
i normally put them on flat side in and hand tight only.

I unbolted the calipers and it was pretty hard to get them off the rotors. I had to work around a little to get the calipers to slide off the rotors.

MFW - do you have a line on a rebuild kit??

[michaelmosty]

when the wheels are off, make sure you put the lugnuts back on to ensure the rotor is not "cocked" on the hub. 4th gens are like this and it makes a difference when checking for "free wheel" of the rotor.
i normally put them on flat side in and hand tight only.

I unbolted the calipers and it was pretty hard to get them off the rotors. I had to work around a little to get the calipers to slide off the rotors.

MFW - do you have a line on a rebuild kit??

FYI, I've been running O'Reilly calipers for 4 years. The first set were spread after this last TWS event so I had new calipers on there for ECR. I think they are about $50 each.

[Rob Liebbe]

My PBR - Corvette style - have been on for five years with no problems.

[Jeremy Gunter]

WOW! you guys are so sweet...

Frank asking what in god's name is that noise? WEEEEEEEEEEEHHHEEEEHHE....

:lol: :lol: :lol: :lol: :lol:

I'm always in a hurry guys, sorry 8)