1996 to 2004 Racecraft Drop Spindles....AI or AIX only.

[rpoz27]

Having to go back to stock spindles on the mustang due to new shock install. New struts are too short to make these work and keep legal ride height or headers off the ground. Works perfect with any off the shelf strut (koni or Bilstein) with stock arm/springs or coil overs. depending on wheel clearance, you might have to order shorter springs if using coil overs. These have no powder coating so they can more easily be inspected for cracks. These have the "road race" option with additional gusseting and are drilled for bolt through bump steer kit. I also worked with the guys at Racecraft to ensure these spindles had MUCH more weld penetration as a test bed for their revised design. They are ready to bolt onto your car with stock ABS sensors or use the 2007 up GT sensors for the FRPP racing ABS. spindles are over $700 new to your door and really help with the front geometry for better turn in.

Asking $450 picked up in CS or plus shipping....they aren't light!