Heads are off. I don't see anything wrong. I only had 25 to 30 psi compression on number eight but it looks great.
JJ
Saw Westminster Abbey today... WOW!!!
Going to Stone Henge tomorrow and Windsor Castle and the Roman Bath's
Was nice to bring Trina along on this "business" trip...
Marshall Mosty
AI/SI Texas Regional Director
2011 NASA-TX American Iron Champ
AI #67 "Mosty Brothers' Racing" (RIP)
ST6 #21 Toyota Corolla (being revived)...
Man, we need a Mosty intervention. Whose in?
Stonehenge is overrated... I took the walking tour and at the end there was a disclaimer "that they didn't really know why it was there"...
Check the schedule for Silverstone, they run sprorts car races (like SCCA) and you might get to go in just like you would if you were a guest at one of our events.. I arrived there late on a Sunday afternoon and they were locking up but the security officer took us for a quick tour...
Thanks Mitch. May need to have your number on speed dial. Would blowing air in the bolt holes work to get the liquid out?
Thanks.
Randy English
NASA Texas --> Rocky Mtn Region
CMC #77 Camaro
I agree-Westminster Abbey should not be followed by- Wow. I lived there for 3 years and would only say Wow about the indian and thai food. As Churchill said "its impossible to convict for sodomy, half the jury doesn't think its possible and the other half are doing it"
Bryan Leinart
CMC #24
Only if you have a long tube that will reach the bottom of the hole. Blowing down from the deck surface will not work. We did this and it still hydrolocked a headbolt hole and blew the bottom out. Since the OEM headbolts have a threadlocker on them, they seal the hole and compress the liquid inside. We all know how well that works out.
Bookmarks