-
Torsen T2: need to pull axle. Instructions?
My orange SN95 came with a Torsen T2. Wheel seal on driver's side is leaking so thought I'd pull that axle and replace the seal and bearing while I'm at it.
I see plenty of instruction online on how to pull the axle for a stock installation. I don't however see any instructions on the procedure when you have the Torsen.
Anyone have experience here?
Thank you. I feel like I'm constantly asking for advice. Once I get on track you all will be kicking my ass at least early on so hopefully that makes up for all the advice I'm asking.
-
Senior Member
Carroll Shelby
Its the same as the stock. Everything looks a little different inside but you still have c-clips. On the T2R the clips are behind a big washer.
JJ
-
Thank you. Now I have to figure out how to remove the bolt, which was slightly rounded by someone else. It's always something...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks