Really. Sub-frame connectors.
Really. Sub-frame connectors.
Randy English
NASA Texas --> Rocky Mtn Region
CMC #77 Camaro
Well yesterday I took the final exam for my last class needed for my AAS degree.
I had a course average of 102.33 going into the final. If I didn't take the final, I would have made an 81 in the class. I would have had to make a -57 on the test to fail the class. Still studied for 2 days and feel I made an A on the final. Grades due by Friday, should be an A.
So glad to be done with this. I started taking classes there in 1998 w/ getting my A&P in mind. Got my A and most of my P. Switched paths in 2009 after taking 9 years off (left the service and got into telecomm - never looked back at the aviation industry). I was laid-off in 2009 and had some free time to go back and switched from Aviation Maint Technology to Aviation Maint & Electronics Technology. It fit my current post military work history better. Pecked away 1 and 2 classes per semester over the last few years. Sometimes taking nothing or dropping for new job reasons. Dropped once because the class was over my head. That alone set me back a year (drop = wasted semester, remedial class to get up to speed = semester that didn't count towards degree or GPA, then retake original class).
So, I finished a AAS that took me 16 years to complete. Not proud of that at all. This will not get me anywhere job wise as I have 10 times the work experience than what an AAS is worth.
Hope to be able to put more time into CMC going forward. Still have 2 kids playing softball all year plus basketball as well. Still have that frickin bathroom shower to finish too.
No real point to my post, just wanted to share.
Last edited by GlennCMC70; 05-13-2015 at 06:53 PM.
Way to go Glenn! I went back and finished my degree in 99 when I was between careers after bouncing back an forth over the years between work and school, I think it only took me 13 years and 11 months. I studied a year in electronics starting out then went to work and learned a lot more along the way in a medical equipment field. I was involved in aviation most of the time and did some avionics installations later on for the cargo airline I was working for because I was tired of flying POS avionics. I wasn't even in the same league as the navy radar techs I was working with in the medical field, but what I learned over the years made the transition to aviation electronics easy. There is a huge backlog for avionics installations right now and ADSB is mandatory in 2020, so if you get in a pinch, I am pretty sure you would get a bite as soon as you dip your hook in the avionics arena. They will take your shoes and chain you to the stove once they figure out what they have in you though....... :-)
Dennis
I did bench level comm/nav repair for almost 10 years in the service.
Avionics backshop? Don't kick yourself, I pursued an ME degree prior to joining the service. I've done some remedial work to get somewhat back up to speed and still tell myself that someday I'll finish. My span will exceed 16 years and I'll be damn glad when I finish.
Awesome job Glenn. Great accomplishment.
Thanks for posting that Glenn, very inspirational. I would love to go back to school and get a degree.
Excellent, that's a lot of work.
Bookmarks