I am looking for just a short block but open to anything as long as it is a 5.3.:cry:
I am looking for just a short block but open to anything as long as it is a 5.3.:cry:
Round about 05 Chebby made a TX only truck that was based on the 4wd frame and included stub axles to keep tension on the 4wd style wheel bearings. It even had the illustrious torsion bars. It also received the L33 5.0 HO with aluminum block with 4.8L flat topped pistons. If ever there was a 5.3, this was it. Unfortunately, most boneyards seem to realize this. But if you come across one that doesn't, this would be THE 5.3.
Ran good for 3 sessions in t&t, the engine started to miss real bad and white smoke pouring out the back. I came in and the engine locked up at the paddock. I pulled the the plugs and # 3 was full of gas (hydrostatic lock) I removed the fuel injector rail you and injector was stuck wide-open dumping fuel just from the pressure in the tank, by that time the intake manifold was full of gas! I cleared all the fuel out, then went to find an injector! None of the parts stores had an injector finally found one out at the boneyard. Install the injector put all the plugs back in fired up knocking like crazy (bend rod or bearings)
But I had a great time watching Mike Patterson and John Martin Race! They did a great job!
You might just need new a new rod/crank/piston; My first motor i "blew" was a hydrolock, spun rod bearings caused the piston to smack and lift the head causing the cylinder to flood , twisted a rod and gouge the crank, but block/bores were fine.
Worth having the builder pull it apart first...
Sorry to hear that Sean...
Marshall Mosty
AI/SI Texas Regional Director
2011 NASA-TX American Iron Champ
AI #67 "Mosty Brothers' Racing" (RIP)
ST6 #21 Toyota Corolla (being revived)...
Hate hearing that-wonder how the injector got stuck. Certainly should be able to find one around houston but I'll keep my eyes out. Sure you have already checked ls1tech and craigslist butt they usually pop up there. I agree for $500 you should just buy another motor but I think you had the builder go through the one that was in it and do a few things? I think you either don't open it up and put it in or you build up a nice motor. Just tough to justify once you go through with any labor to tear down, inspect, clean, machine work and then any parts or even the gaskets. But then you could have some spares and end up with another short block put together ready to go.
You want that LS6 shortblock I bought from you back?
How was the car before that? We need a trip report from all of you guys.
Bryan Leinart
CMC #24
That really sucks man :-/, I've got a 160k mile junkyard 5.0 in my car, but I found some new 19lb injectors on ebay that ran me $100 that I tossed in for insurance. I think I still have the stocker ls1 injectors out of my 36k mile LKQ motor (2000 f-body), let me know if you need them.
Bookmarks