Still gotta redo the TT, rebalance clutch, and get the trans new syncros. Racing has seriously eaten into its time/money budget so for now it sits.
Still gotta redo the TT, rebalance clutch, and get the trans new syncros. Racing has seriously eaten into its time/money budget so for now it sits.
Found an interesting article/paper on rear diffusers.
http://www.engr.uconn.edu/~barbertj/...rs/Blevins.pdf
Marshall Mosty
AI/SI Texas Regional Director
2011 NASA-TX American Iron Champ
AI #67 "Mosty Brothers' Racing" (RIP)
ST6 #21 Toyota Corolla (being revived)...
Man that's a lot of fancy book learnin' words.
I opened the link, saw the math calculations, and decided not to proceed....
-Michael Mosty
CMC #11 Mosty Brothers' Racing
Director - TX Region
As in applies to rockets. Theoretical equations with no practical applicability to race cars. Shape of the underbody, moving ground plane, rotating wheels, variable ride height, interaction with the flow over the top of the car, etc. If you are looking to build a diffuser, this is good stuff. If you are looking to put a rear diffuser on a racecar, don't confuse yourself with this stuff...
Richard
Took my driveshaft to be balanced and found it was "significantly bent" and required a new "tube" be installed. So, the cost of 41" of 3.5" 0.125" wall 6061-T6 plus cutting/welding/balancing is apparently $352... Gotta love "custom" parts. Lol
On the plus side, I took the car around the block today and no funny noises from the new gears or diff.
Also, found a loose front lower control arm bolt. Glad I checked them.
Marshall Mosty
AI/SI Texas Regional Director
2011 NASA-TX American Iron Champ
AI #67 "Mosty Brothers' Racing" (RIP)
ST6 #21 Toyota Corolla (being revived)...
Finished the new front springs/perches in #34 this weekend. Next up is to do a good setup and finish the Texas flag install on the roof.
Daniel Records
CMC # 34
Bookmarks