Has anyone ever used an enclosed trailer with dual 3600 lb axles, for a CMC car? Just doing simple math, it seems like the 3600s should work, but that's probably why it's called "simple" math.
Comments very much appreciated.
thx
chris
Has anyone ever used an enclosed trailer with dual 3600 lb axles, for a CMC car? Just doing simple math, it seems like the 3600s should work, but that's probably why it's called "simple" math.
Comments very much appreciated.
thx
chris
CMC car plus fuel jugs, tires, tools, pit bike, more tools, air conditioner, jack etc. It is human nature to fill all of your available space and it all adds up faster than you think. Given that, I am a firm believer in having more axle and tire capacity if you can.
Rob Liebbe - Texas Region
Camaro, Mustang, doesn't matter to me, I'll race it.
Agree with this assessment. Spend the extra $$ on the 5200lb axles for the enclosed. For example My 20' steel open trailer weighs 2600 with 2x3500# if I recall correctly. My CMC car is about 3k sans driver puts me at 5600 before I put the support stuff on. Once I add the Tirerack I'll I be around 6200# with tires, toolbox, and car. An enclosed will weigh more empty and as Rob said you'll be more inclined to pack more junk in it. The only time I can think 3600# axles enclosed is good if your tow vehicle isn't rated for more than 7500# and you're trying to avoid being overweight per the door tag on the truck.
Daniel Records
CMC # 34
My pig of a 24' is 4600 empty so I'm an easy 8500# loaded. I need to weigh it just to see how much margin I really have. 10k GVWR was an absolute must for me and I thought the trailer would be closer to 3600 empty. I sleep in my trailer, so I keep bedding and stuff in there too. I'm actually wanting to build a flip down frame for the bed so it's out of the way durine the day. Also consider the possibility of carrying a spare engine, trans, rear end, or big ass tool box if you're hitting a major event. Having that margin is nice and the bigger axles get bigger brakes.
Last edited by Supercharged111; 03-14-2017 at 06:29 PM.
RM CMC Director
If you have the option to start from scratch, get the 5200lb. I'm currently not too fare below the 7000lb max with my open 18ft with two toolboxes, 6 fuel jugs and an 8-tire rack.
When I re-did my trailer axle setup, i really wanted to go up to 5200lbs but the cost of changing out all of my hubs/brakes/wheels wasn't worth it given that one day I will trade it for an enclosed.
Last edited by Pranav; 03-16-2017 at 07:08 PM.
Trailers are dead simple devices. You can buy entire axle assemblies and mounting brackets. I think Pranav carries one on his trailer now Its not so much "can it be done" rather is it worth the money and time over just buying what you want.
Al Fernandez
Bookmarks