We'll have to measure the play on mine since it has c clip eliminators and I have plenty of knockback.
Al Fernandez
Dorman clips came in today, they measured .159" thick. My old ones were .152" and .153", so definitely thicker. That plus a rosette weld on the axle end should have me good to go here. Going to leave a .010" gap per side, or as close as I can get. That'll eliminate.053" of end play. Along with new rear pads and tighter front hubs should be a more confidence inspiring car.
RM CMC Director
I rosette welded the axles and got it down to ~.0115" on one side and ~.0135" on the other. I feel like the c clips got rid of more than just the 6 and 7 thou that I measured. We'll have to see how the car feels now at a cheatin' bastard practice session.
RM CMC Director
Maybe try this....???? https://www.pro-touring.com/threads/...ad-knock-back?
I installed one in my car back in the day. Didn't make any difference.
Al Fernandez
Bookmarks