How to regrease SN95 hubs.

[RichardP]

As a heads up, the center bore on S197 hubs is larger but the design is the same. I was able to machine the other end of my tool to pull apart those hubs for greasing...

Richard P.

[marshall_mosty]

As a heads up, the center bore on S197 hubs is larger but the design is the same. I was able to machine the other end of my tool to pull apart those hubs for greasing...

Richard P.

I've always just used a flat blade screwdriver between the two inner race halves to tap the inner race out and then use a socket on the outer race.

[centerville]

As a heads up, the center bore on S197 hubs is larger but the design is the same. I was able to machine the other end of my tool to pull apart those hubs for greasing...

Richard P.

I paid attention when you said that last weekend. But as I have never done this pics are worth 1000 words. I might steal your design and make my own once I see what I am supposed to be doing.