Results 1 to 10 of 22

Thread: SN95 Wheel Tire Help Please!

Hybrid View

  1. #1
    Senior Member Rookie
    Join Date
    Apr 2017
    Location
    Haltom City
    Posts
    236
    I didn't think about removing the spring. So I can run it Friday I am just going to have the tires moved to an extra set of the Steeda's I have.

    I have a feeling that tire rub is not the only thing I am going to find that needs attention after Friday.

    Car is too shiny and orange.

    Thanks again.

  2. #2
    Senior Member Carroll Shelby
    Join Date
    May 2013
    Location
    Arlington, TX
    Posts
    1,017
    Quote Originally Posted by centerville View Post
    I didn't think about removing the spring. So I can run it Friday I am just going to have the tires moved to an extra set of the Steeda's I have.

    I have a feeling that tire rub is not the only thing I am going to find that needs attention after Friday.

    Car is too shiny and orange.

    Thanks again.
    These MB Weapons I am bringing for you are +27 so that should help with clearance.
    Tyler Gardner
    CMC #13 2015-2017
    SM #013 2018
    www.dfwmustangs.net

  3. #3
    Senior Member Rookie
    Join Date
    Apr 2017
    Location
    Haltom City
    Posts
    236
    Quote Originally Posted by mach1 View Post
    These MB Weapons I am bringing for you are +27 so that should help with clearance.
    Awesome.

  4. #4
    Senior Member Rookie
    Join Date
    Apr 2017
    Location
    Haltom City
    Posts
    236
    Can someone tell me what size and pitch the lug studs are? I jacked up the threads on one front and one rear. Replacing front hub now but can't seem to find the right thread chaser for them.

  5. #5
    Quote Originally Posted by centerville View Post
    Can someone tell me what size and pitch the lug studs are? I jacked up the threads on one front and one rear. Replacing front hub now but can't seem to find the right thread chaser for them.
    Mine are 1/2-20
    CMC #50

  6. #6
    Senior Member Rookie
    Join Date
    Apr 2017
    Location
    Haltom City
    Posts
    236
    Nevermind. Summit in the morning and i will be ready to go. Mine is seems finer than 1/2x20. I will have spares now. Looking forward to meeting everyone. Mike

  7. #7
    Senior Member Carroll Shelby Fbody383's Avatar
    Join Date
    Aug 2006
    Location
    Pearland, TX
    Posts
    3,269
    Quote Originally Posted by centerville View Post
    Car is too shiny and orange.
    No such thing... well, except maybe the shiny part.
    #39 CMC Camaro
    Orange is Fast!
    CMC-NT01 FTW!

  8. #8
    Junior Member Rookie
    Join Date
    Apr 2014
    Location
    Virginia
    Posts
    3
    I ordered a set a ESR SR07's 9.5 wide with 20mm offset. They were just delivered this afternoon... I weighed them on a digital bathroom scale and they are 21.4lbs. I don't have the tires mounted up yet but, by my calculations, an .875 spacer on the rear and a .500 spacer on the front should put you just shy of 1/16 of the max CMC track width for a 94-98 SN95. I run Wilwood 4 piston Superlites on the front and they clear the calipers by ~.250 with no spacer... so there should not be any caliper clearance issues. I ordered them directly from ESR and they were $649 delivered to my door... slightly more than the MB Battles but they seem to be a good replacement since the Battles are no longer available.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •