First - welcome to the best group in NASA. Yes we're biased.Originally Posted by NASA CCR
Main Hoop/Halo Intersection - would be interesting to see in person, and hopefully it looks better. And because I want to understand perspectives better, it would be interesting to see what Tech says about that. I don't think there are any Texas AI/CMC cars put together like that.
Don't confuse "mounting points" and "mounting plates;" my quick scan of the CCR is that those are used together to join the cage to the chassis and a mounting plate has a minimum size.
When you say you think you have too many, what are you counting?
2 at the floor under the A-pillar
2 for the main hoop
2 for the rear stays
In the old car (RIP) the upper door bar was almost to the top of the door skin. I always left the door closed to egress as the cool kids say. You'll want to get the seat adjusted also to make sure you can clear the seat halo if you have one.
Anyway, welcome aboard and ask all the questions you need to. You'll always have a hijacked thread and get half the information you want/need.
David
Bookmarks