PDA

View Full Version : AFR rocker studs/guides and misc FOX engine hardware



j3ffbrooks
05-14-2008, 11:18 AM
AFR 7/16 rocker studs and pushrod guides minus 1 each.

These were bought from a fellow racer who bought a set of AFRs assembled and then replaced everything on the heads so these are basically new. I used one stud and guide to replace my dropped valve incident. I'll also include a set of the AFR spring retainers.

$40 shipped.



Hydraulic Roller lifter conversion.

Comes with the dogbones, spider, 15 lifters and 16 pushrods. All used, but good condition.

$60 shipped.



Misc. stock SBF/302/Fox engine hardware.

Full set of stamped 1.6 rocker arms with hardware
3 camshaft retainers
at least 1 full set of oil pan bolts
at least 1 full set of intake bolts
1 timing pointer
2 sets of header bolts
balancer bolt
2 or 3 sets of crankshaft main bolts
flywheel bolts
partial set of valve cover bolts
water pump/timing cover bolts
stock trac-loc pin and bolt

There are a few other bolts too.

$40 shipped. SOLD



SBF Head Emission port plugs

I've got 7 of these. $10 shipped SOLD


PM me if interested in any of this. Make offers if I'm being unreasonable.