PDA

View Full Version : Body work.


GlennCMC70
05-02-2010, 08:46 PM
Not bad for a first try.
Before:
http://www.aicmctexas.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=481&g2_serialNumber=1

After:
http://www.aicmctexas.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=490&g2_serialNumber=1

Welded some 1/4" bolts to about 10-15 different spots and attaced an eyebolt to them. Put a come-along on the frame of the work van and had the kids out working the come-along handle. They had a ball pulling the dents out. Pulled a few holes from the bolts ripping out. But for about 2 hrs work and a first try, I'm OK w/ it. I'll hit it w/ some color and call it good till the new car is finished. I'll not be running this chassis in 2011, and Hallett will likely by my last event in this one. Even pulled the one on the other side thats been there since AG hit me at MSR-H in the rain back in 2006.
jeremiahkellam
05-03-2010, 07:45 AM
I'll hit it w/ some color and call it good till the new car is finished.

Hit it with color?? Hell, then it won't match the rest of the car :wink:
GlennCMC70
05-03-2010, 08:02 AM
Should I just rub up against it w/ an old tire?
David Love AI27
05-03-2010, 09:05 AM
Should I just rub up against it w/ an old tire?

I have old tires on the 27 car.... maybe I can help you out.... :twisted:
BryanL
05-03-2010, 04:10 PM
I'll hit it w/ some ROOKIES CARS AT HALLETT and call it good till the new car is finished. I'll not be running this chassis in 2011, and Hallett will likely by my last event in this one. Even pulled the one on the other side thats been there since AG hit me at MSR-H in the rain back in 2006.

Fixed it for you.
edrock96GT
05-03-2010, 06:27 PM
HAHA! It won't be me, I have to miss Hallet.

Not that I'd be able to get anywhere near Glen anyway :oops:
MikeP99Z
05-03-2010, 06:33 PM
I have to miss Hallett.

Boo, it's a great event.
edrock96GT
05-03-2010, 09:50 PM
I have to miss Hallett.

Boo, it's a great event.

I know...

...G@ddamn Army... :lol:
GlennCMC70
05-03-2010, 09:52 PM
Have you considered going awol? Just for a couple days. :wink:
edrock96GT
05-04-2010, 08:20 AM
I may have to have a umm...doctor's appointment.


...anyone know a doctor? :)
mitchntx
05-04-2010, 08:22 AM
I may have to have a umm...doctor's appointment.


...anyone know a doctor? :)

I'm sure Dr. Frank can give you a note.
GlennCMC70
05-04-2010, 08:36 AM
How about 'ol Doc Proctor?
cobra132
05-04-2010, 10:16 AM
Happy to give a Doctors excuse, whats the worse that could happen??
Adam Ginsberg
05-04-2010, 10:30 AM
I may have to have a umm...doctor's appointment.


...anyone know a doctor? :)

Call this guy:

http://4.bp.blogspot.com/_eC_CacGjgfA/RiZgZhmh8qI/AAAAAAAAARk/HDOwCmg7dzM/s400/doc.jpg
GlennCMC70
05-21-2010, 02:27 PM
Not bad for a first try.
Before:
http://www.aicmctexas.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=481&g2_serialNumber=1

After:
http://www.aicmctexas.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=490&g2_serialNumber=1

Welded some 1/4" bolts to about 10-15 different spots and attaced an eyebolt to them. Put a come-along on the frame of the work van and had the kids out working the come-along handle. They had a ball pulling the dents out. Pulled a few holes from the bolts ripping out. But for about 2 hrs work and a first try, I'm OK w/ it. I'll hit it w/ some color and call it good till the new car is finished. I'll not be running this chassis in 2011, and Hallett will likely by my last event in this one. Even pulled the one on the other side thats been there since AG hit me at MSR-H in the rain back in 2006.

Finished results. I suck at this for sure. It should get me thru the next event and Nationals.

http://www.aicmctexas.com/forums/gallery2.php?g2_itemId=519