PDA

View Full Version : Parts sale



Wirtz
07-14-2010, 03:03 PM
Ended up using some of my spare time to clean the garage and my spares boxes. So I offer these for your consideration. Let me know if any questions. Thanks! Jeff


18" Permicool electric fan - $100
Reversible direction, 2550 cfm, aluminum blades. 18" diameter and about 3.75" thick with 4 adjustable mounting legs. Part number 19117. Fan is new in box, costs 150 plus shipping from the large discount part houses.
http://lh3.ggpht.com/_O0bFZ_cq_Xs/TD4PqwnljYI/AAAAAAAAAa0/FAmJpZ8bFVM/s800/DSC03738.JPG

8 quarts - Castrol Mercon V ATF - $20
8 quarts of Castrol Mercon V transmission fluid. Had them left on my shelf from a previous vehicle. AutoZone shows it at $4.60 per quart (that’s 36.80).
http://lh5.ggpht.com/_O0bFZ_cq_Xs/TD4PrawxOtI/AAAAAAAAAa4/TnpwzOHAUIE/s800/DSC03740.JPG

Unbalanced Engineering rag-joint eliminator - $10
I ran this for several events but had some issues with fluid leaking past the front seal on the steering box, so I went back to a rag joint. It still leaks some… I do think when this is installed, the steering box and steering shaft need to be in good alignment for it to work well. I found by playing with the mounting slop in the box and shaft mounts, this could be achieved.
http://lh5.ggpht.com/_O0bFZ_cq_Xs/TD4PvuhQvoI/AAAAAAAAAbM/v1gSlrAneBI/s800/DSC03754.JPG

Toe-bar alignment system – $15
Not shown is a connecting bar that holds the left and right indicator, but that is also included. Place this bar across your car, stick a piece of tape to the tire, then puncture the tape with the point on the toe bar. Then roll the car so the tape is on the opposite side of the tire and compare the marks to the pointers, it’s a simple system to measure toe. I’ve upgraded to the uber-pimp Pi-Co toe plates :) 40 new without the connecting bar.
http://lh4.ggpht.com/_O0bFZ_cq_Xs/TD4Pxg6rG8I/AAAAAAAAAbU/mfQPEJ0W4oc/s800/DSC03756.JPG

Edelbrock Air / fuel meter – $80
Still new in bag and includes everything in the kit including weatherpack connectors and the weld in exhaust bung. Lambda sensor is still new. 140 new through Summit.
http://lh3.ggpht.com/_O0bFZ_cq_Xs/TD4Pya8_X2I/AAAAAAAAAbY/488iYraoHio/s800/DSC03757.JPG

One set of Moog outer tie rods – $20 for both
These are the Moog Problem Solver outer tie rods for 82 to 92 F-bodies. New in bags. Normally ~$20 each new. I was carrying these as track spares.
http://lh4.ggpht.com/_O0bFZ_cq_Xs/TD4PzHGF6WI/AAAAAAAAAbc/swpESydo6Nw/s800/DSC03758.JPG

Spohn tie rod adjusters - $15
Chrome-moly heavy duty tie rod adjusters. Never installed, carried as spares. $30 new.
http://lh5.ggpht.com/_O0bFZ_cq_Xs/TD4Pz-nf0xI/AAAAAAAAAbg/WvYa5tScpc0/s800/DSC03759.JPG

Edelbrock front strut tower brace – $40
Fits any carbureted car. Used. $130 new.
http://lh3.ggpht.com/_O0bFZ_cq_Xs/TD4P3SVPtRI/AAAAAAAAAb4/i52e2WU8toY/s800/DSC03764.JPG

Wirtz
08-03-2010, 05:22 PM
Updated post for sold sthuff.