GlennCMC70
09-09-2011, 10:09 PM
Had a video card die on me overnight couple nights ago (fan fell off and cooked the chip). I got a new video card (Radeon HD 5450 2G DDR3) and while I was there I thought I would up the RAM.
Video card works great so far.
Now for the problem involving the RAM. PC is a eMachines T5212. Originally came w/ 512M RAM x2. Mitch was nice enough to give me a pair of G.Skill 2G cards (they say DDRII2GB PC2-6400). I installed them and discovered one of the 2 was bad (he told me this could be the case when he gave them to me). I was OK w/ it since I was moving from 2 512M cards (1G) to 1 2G card. I was 2 times better off w/ just the one card. So forward to today where I pick up a pair of PNY 2GB cards to populate both slots (to get 4GB total). They are DDR2 PC2-6400's. Neither will work in my PC. I tried both one at a time in slot 0 and the PC would not boot.
So I find a site that says it can scan my PC and tell me what RAM would work. This is what I get:
DDR2 PC2-5300
Memory Type: DDR2 PC2-5300, DDR2 (non-ECC)
Maximum Memory: 2GB
Currently Installed Memory: 2GB
Total Memory Slots: 2
Available Memory Slots: 1
2GB
DDR PC2-6400 EMPTY
Each memory slot can hold DDR2 PC2-5300 with a maximum of 1GB per slot.*
It is the last line that has me confused. It says my PC will only take a 1GB card per slot for a max of 2GB total. But I have a 2GB card in slot 0.
Is this just an issue of the G.SKILL card working where it shouldn't? I checked the bios and it see's the G.Skill card as 2048MB in slot 0. Should I seek out a G.Skill card (2 of them)?
Video card works great so far.
Now for the problem involving the RAM. PC is a eMachines T5212. Originally came w/ 512M RAM x2. Mitch was nice enough to give me a pair of G.Skill 2G cards (they say DDRII2GB PC2-6400). I installed them and discovered one of the 2 was bad (he told me this could be the case when he gave them to me). I was OK w/ it since I was moving from 2 512M cards (1G) to 1 2G card. I was 2 times better off w/ just the one card. So forward to today where I pick up a pair of PNY 2GB cards to populate both slots (to get 4GB total). They are DDR2 PC2-6400's. Neither will work in my PC. I tried both one at a time in slot 0 and the PC would not boot.
So I find a site that says it can scan my PC and tell me what RAM would work. This is what I get:
DDR2 PC2-5300
Memory Type: DDR2 PC2-5300, DDR2 (non-ECC)
Maximum Memory: 2GB
Currently Installed Memory: 2GB
Total Memory Slots: 2
Available Memory Slots: 1
2GB
DDR PC2-6400 EMPTY
Each memory slot can hold DDR2 PC2-5300 with a maximum of 1GB per slot.*
It is the last line that has me confused. It says my PC will only take a 1GB card per slot for a max of 2GB total. But I have a 2GB card in slot 0.
Is this just an issue of the G.SKILL card working where it shouldn't? I checked the bios and it see's the G.Skill card as 2048MB in slot 0. Should I seek out a G.Skill card (2 of them)?